Stock cubes+150shot= 10.50@130
#1
Stock cubes+150shot= 10.50@130
Ran my new personal best this weekend at Tri-State Raceway in Iowa. The conditions were perfect; we had good air, a good tailwind, and i am sure it helped that the track was sloped a little bit. Initally I made some passes on drag radials and only come run a 10.88 with a 1.78', but once I used my buddies slicks the car picked up. Thats when I ran a 10.50@130 with a 1.55 60' time.
I think there is still some left in the car with a crappy 60' my car is pulling for an a4. The suspension isn't working right if you watch the video the front end doesn't move at all! I think it may be possible to touch 9s if everything was in perfect order on a 200shot, but its hard to say!
Here is the video:
http://www.youtube.com/watch?v=rBa7XFDg7aE
I think there is still some left in the car with a crappy 60' my car is pulling for an a4. The suspension isn't working right if you watch the video the front end doesn't move at all! I think it may be possible to touch 9s if everything was in perfect order on a 200shot, but its hard to say!
Here is the video:
http://www.youtube.com/watch?v=rBa7XFDg7aE
#3
I dont know exactly what the car runs on motor, its been a few years since i ran it on motor. For all the hard parts of my suspension its all UMI pieces. I have a k-member, lower a-arms, torque arm, rear lca and brackerts, and a panhardbar.
For front suspension i have strange coilover setup wtih DA shocks(which do not work at all!) with a 275lb spring, and the rear is DA afco shock with stock springs(still dialing them in).
For front suspension i have strange coilover setup wtih DA shocks(which do not work at all!) with a 275lb spring, and the rear is DA afco shock with stock springs(still dialing them in).
#5
9 Second Club
iTrader: (11)
Join Date: Oct 2007
Location: South Ga
Posts: 1,828
Likes: 0
Received 0 Likes
on
0 Posts
I dont know exactly what the car runs on motor, its been a few years since i ran it on motor. For all the hard parts of my suspension its all UMI pieces. I have a k-member, lower a-arms, torque arm, rear lca and brackerts, and a panhardbar.
For front suspension i have strange coilover setup wtih DA shocks(which do not work at all!) with a 275lb spring, and the rear is DA afco shock with stock springs(still dialing them in).
For front suspension i have strange coilover setup wtih DA shocks(which do not work at all!) with a 275lb spring, and the rear is DA afco shock with stock springs(still dialing them in).