Will I be 10's w/ this setup?
04-21-2005, 07:36 PM
#1
Launching!
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Mustang, OK
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Will I be 10's w/ this setup? I've got a forged 383-lt4 stroker w/ an intercooled procharger pushing 15lbs of boost. 12-way adjustable Qa1's all the way around. 9" ford rear end w/ 33 spline moser axles and strange hd posi w/ 3.55's. Tubular k-member, front tubular upper and lower a-arms. Box sfc's. viper t56 w/ mcleod street twin clutch. chrome moly adjustable panhard bar. MSD ignition, and other stuff. 10's or no. I will be driving to tulsa, ok to dyno on May 9th. What do u guys think.
05-01-2005, 04:36 PM
#2
10 Second Club
Join Date: Mar 2005
Location: Jones, OK
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
dude if ur not i think u got somethin wrong.
i ahd 10 pds on my 95 LT1 no internal mods or anything. i no u cant tell anything by out on the street. But it felt stronger than what my 10 sec LS1 does now. I had 4.10s so i no that made a lil diff but man 15 pounds on a 383 id deff think u r there. but like everything else u never no till u go to track
i ahd 10 pds on my 95 LT1 no internal mods or anything. i no u cant tell anything by out on the street. But it felt stronger than what my 10 sec LS1 does now. I had 4.10s so i no that made a lil diff but man 15 pounds on a 383 id deff think u r there. but like everything else u never no till u go to track
05-03-2005, 09:57 PM
#3
Launching!
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Mustang, OK
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
I figured it would Sam. I just wanted another opinion. I need some rims though, b/c im not going anywhere with my street tires. I'm going to thunder valley once I get my car back and get it to ed wright. It should be by the 23rd. Do you still have that black racing seat by the front door? I need a racing seat and 5 point harness.
05-04-2005, 12:53 AM
#5
10 Second Club
Join Date: Mar 2005
Location: Jones, OK
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Yea im Joe. Sam doesnt have the black seat anymore its n my car. But im sure he can get u hooked up with a 5 point and a seat. Which car is urs? R u the LT1 that is white with black stripes?
05-04-2005, 08:13 PM
#6
Launching!
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Mustang, OK
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
No. This is Josh. I bought your rims and trany. I'm trying to sell it now b/c I traded my old rear end that sam built for this guys t56 that I had redone with viper internals and viper yolk. Do you think sam would want it back? He could probably turn a good profit on it. You can see all the work I've done to my car at cardomain.com/id/thatguyscamaro.
05-05-2005, 12:21 PM
#7
10 Second Club
Join Date: Mar 2005
Location: Jones, OK
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
thats cool man. U still live n city? I havent seen or heard bout ur car n a while. i was gonna ask sam the other day but i havent seen him lately either. I guess ill have to watch out for u sleepin guys so i dont get spanked. Anyway good luck with it man let me no when ur goin to track and ill come watch that thing run.
Trending Topics
05-05-2005, 06:03 PM
#8
Launching!
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Mustang, OK
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I live in the city still. My car has been out of commission since january. I'm doing a ground up on it. New everything. I'm going to have to change my tag b/c I don't think it's going to be "sleepin" much longer. I should be done with it by next week. I'm still waiting on my torque arm and my drive shaft to get in. I'll let you know when I'll be at the track. You haven't been to the shop? What have you been up to?
05-06-2005, 09:41 AM
#9
10 Second Club
Join Date: Mar 2005
Location: Jones, OK
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
ive been to shop but not as much as i used to. I had surgery bout 4 weeks ago so im not down there as much as i used to until after i get healed. Im waiting on my strange 12 bolt to come n so i can go back to valley and play with every1. For some reason alot of the people down there dont like my car. I think its cuz of my low HP but good track numbers. But anyway i cant wait to get my rear man. it drives me crazy not being able to get on my car. all the power and i cant even use it. I havent sprayed n like 2 or 3 months! Its driving me crazy. But anyway man like i said let me know when u get ur car done. Oh ya when sam gets his car done. His name def not b 10secopcar, it would b more like 9secopcar. if u catch my drift. every1 around town is going to have a rude awakening when it gets running. But anyway thats all top secret information. LOL anyway let me no and ill bring the camera so i can c that thing fly man.
Layta,
Joe
Layta,
Joe
05-07-2005, 11:41 AM
#10
Launching!
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Mustang, OK
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
I def. will let u know. Same thing w/ me. All that power just waiting to be unleashed on ever1s ***. Everyone remembers my car as it used to be. Alot of people are gonna think they can beat me. I had a few boost issues w/ it b4 I put this stuff in. I got beat a few times. I aint gonna lie. haha. It's all good though. Surgery sucks ***. I had knee surgery last july. I snapped both ligements in my right. Hurt like a mo fo. What happend to you firebird? STill out of commission? Waiting for the big block? What is sam racing if u have the cop car? He still has that thing in auto trader. I see when I'm looking around. Any way, I'll def see you around. B lookin out for me. Don't worry about people hatin' on ur car, they are just jealous.
05-07-2005, 04:35 PM
#11
10 Second Club
Join Date: Mar 2005
Location: Jones, OK
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
i have A copcar. he still has his car. Traded my bird for some parts. but i traded it to sam. Copcar is my main source of transportation and my "racecar" if u will. I havent been to valley n a while due to the rear. so im hopin when i put the new rear n there ill still b where i was b4. But anyway there r several people hatin on my car. and yes i agree i think its cuz they r jealous. I mean its not my fault they chose to go to the shop they went to.
but anyway good luck gettin that thing together. and i guess well c u at valley when u get it done.
Layta,
Joe
but anyway good luck gettin that thing together. and i guess well c u at valley when u get it done.
Layta,
Joe
05-09-2005, 06:55 PM
#12
Launching!
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Mustang, OK
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Engine is in. I repeat engine is in. Now I just have to wait for my torque arm to get in and order my dennys driveshaft. I would say the beginning of next week it will be done.
05-10-2005, 07:29 PM
#13
10 Second Club
Join Date: Mar 2005
Location: Jones, OK
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
hurry the hell up. May 20th cofba night at valley. bring it down and show them what life is about with a charger. Brandon hit a 10.3 in his car and it was impressive. Now if i can get heads for my car sometime this year i will b down n 10s playing also.l 
05-10-2005, 08:27 PM
#14
Launching!
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Mustang, OK
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
I'm trying to hurry. I just decided to day to get the 12 rib upgrade. I have to order that tomorrow. Just another addition to the ride. Are you in cofba? I was thinking about joining. Some people at the shop I hang out at are in cofba.
05-11-2005, 09:55 PM
#16
Launching!
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Mustang, OK
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Bad news. So, I went to order my draftshaft today. I had to measure it up so I could order one. I call Denny's to order a nitrous ready driveshaft and they are on back order for 3 freakin weeks. ****. That sucks donkey dick. I had to push back my dyno tune again. I am so pissed. I am still going to the track though to see some good runs. I would put my stock one driveshaft in but it won't fit now b/c I have a totally different setup. Damnit.
05-11-2005, 10:27 PM
#17
10 Second Club
Join Date: Mar 2005
Location: Jones, OK
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
so u dont have a driveshaft that will fit it? Damn man that does suck. Dont feel bad i cant go to the damn track cuz my rear is holding on by a thread. I think its gonna b like 6 weeks b4 i can get my rear. Cant bitch to much though cuz i no that when i get it its gonna b the **** and i wont have anything to worry bout with it. Ill b leaving the line harder and cutting better sixty foot times. They say a 12 bolt is 2 tenths. But i got somethin that will cure the two tenths the rear eats up. anyway man if u find someway to get it to track b4 ur new shaft comes n b sure to let me no. I miss hearing the whistle. No1 around here i no of has one that is running that they will take to the track.
Joe
dude i just remembered call Sam. He did a buy in into strange and they make driveshafts i do believe. Mayb they can get u one faster. or if u wanna stay with Dennys thats cool too. I have heard nothing but good about both companies so.
Joe
dude i just remembered call Sam. He did a buy in into strange and they make driveshafts i do believe. Mayb they can get u one faster. or if u wanna stay with Dennys thats cool too. I have heard nothing but good about both companies so.
05-12-2005, 09:24 PM
#19
Launching!
Thread Starter
iTrader: (5)
Join Date: Jan 2005
Location: Mustang, OK
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
I got a strange. Chrome moly steel and they were cheaper than dennys and the stage 3, that's what I got, holds 1200hp or more, was 340. Cheaper than the nitrous ready driveshaft from denny's.