keithystealmaro

my buddy ran a 10.3 in the quarter mile with his brand new suzuki gsxr 600 and i wanna know what do i need to do to hang with him or beat him in my 2000 black ss camaro six speed its stock...

Vertigo

iTrader: (1)

A lot. H/C. spray or FI.... I'd cam and spray if it were up to me.

Sharpe

iTrader: (7)

A LOT. I mean, more than $10 large. Daily Driver? ****. Way more than that. Talk to LS1 Speed, the sponsor if you've got a fat wad. Otherwise, forget it.

ls1aholic

maybe you can swerve over and clip him before he gets going, otherwise be prepared to spend alot of money.

stangeater01

iTrader: (125)

heads cam 200 shot make sure you have enough fuel and pray your bottom end holds up.. stock rear?? most likely need a 12bolt or 9 inch to leave on that hp.. stock suspension? upgrade it. stock trans?? forget it

walker94z28

Send him my way, LOL..... You definitly will need alot of help to hang with him. I would have to say that you would need a MS4 cam and about a 150 to 200 shot of N20....

Specialized

iTrader: (15)

You dont need to mod your car to beat your buddy. Just get a 150 shot and ask him to race from a buck 30 roll.

camarossdn

iTrader: (1)

You just need a cam, nitrous and all the bolt ons. Race him from above 40mph and you will rape him

98redM6

iTrader: (39)

Just buy a hyabusa and smoke his ***. Either way you go your gonna end up spending about the same amount of money and killing yourself trying to beat him.

blk/slvr02ss

iTrader: (21)

thats hard to believe a 600 went 10.30.they only go mid to high 10's stock.you need to leave the light at like 10,000 rpms to get those times.if he can run them times you need a lot of work done to beat that.

Zcleanest28

408 plus a big shot. 9" with 4.11s...10.50 class slicks, spec 3+, lucky lottery ticket

stainless40cal

h/c/i 225 rwhp shot and a good tuner! Is this bike modded at all cause that seems kinda fast for that 600...

10SecDreamer

iTrader: (7)

iono seems past a 100 they run out of power...I've ran a honda 600rr if thats any different? from a 60 and pulled on him by the time I was at the end of 3rd

chrismorales75

It would be cheaper giving the guy money and let him make his bike faster and crash it =)

SILVERBIRD97

iTrader: (33)

I have built a cam/ heads combo LS1 running on pump gas that went 10.08@139mph. It had a turbo 400 /4500 stall and it was in a third gen firebird. It can be done!!!

corum

that is kind of fast for a stock 600!!! but the guy that said get a hyabusa, bring that own here to meet up with my gsxr 1000, and we will go for pink slips....... i rape those POS' all day!!! HIGHLY over rated!! their just to heavy for a bike stand point!!

z28boy

iTrader: (2)

Yea that does seem kinda fast for a gsxr600.My buddy went 10.90 on his 07 gsxr600 with a 2brothers slipon pipe.

LS1Z28-00

iTrader: (8)

i agree with everyone else, head, cam and spray. i have an auto and H/C and from a roll(not my strong point) was door to door with a cbr f4i 600. we raced 50-120 and i was about to start pulling hard. race him from a roll for the sake of your rear end, get a racing clutch and H/C, spray 200. you can get out for around 3k(doing the work yourself) youll beat any stock 600 on the highway probley.