Am I there yet? 7.9@96mph
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Dallas, TX
Posts: 1,733
Likes: 0
Received 0 Likes
on
0 Posts
Am I there yet? 7.9@96mph
http://www.youtube.com/watch?v=L_aJWzedYSA
http://www.youtube.com/watch?v=vwlnG5AXq0g
How close am I to 11's?
If I could get a better 60ft I'd be there. Best I could get out of the stock clutch was 2.060ft.. Nitto NT05Rs did well just clutch stuck to the floor if I launched hard.
Best run:
2.03 60ft
5.28 330 ft
7.94 1/8th
94.1 mph
Best MPH was 96. Still with a 2.0 60ft.
I know a 1.6 60ft would put me at least at 7.5. Driving the same.
Bummed I can't get a good 60.
http://www.youtube.com/watch?v=vwlnG5AXq0g
How close am I to 11's?
If I could get a better 60ft I'd be there. Best I could get out of the stock clutch was 2.060ft.. Nitto NT05Rs did well just clutch stuck to the floor if I launched hard.
Best run:
2.03 60ft
5.28 330 ft
7.94 1/8th
94.1 mph
Best MPH was 96. Still with a 2.0 60ft.
I know a 1.6 60ft would put me at least at 7.5. Driving the same.
Bummed I can't get a good 60.
#3
The car is def capable of 11's. Keep at it!!!
Interesting...you're close to 500rw and trapped 96...I'm at 391 and trapped 94 while hitting the rev limiter several times.
Granted mine is a stalled auto and dyno run was with the verter unlocked....just goes to show dyno#'s are meaningless.
Interesting...you're close to 500rw and trapped 96...I'm at 391 and trapped 94 while hitting the rev limiter several times.
Granted mine is a stalled auto and dyno run was with the verter unlocked....just goes to show dyno#'s are meaningless.
#6
TECH Resident
iTrader: (21)
Join Date: Feb 2005
Location: lakeland, fl
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
something is wrong with your mph.. with headers vararam only I was trapping 98.0 in the 1/8 at 7.8 et 2.1 60
with 495rwhp you should be trapping at or over 104mph in the 1/8
good looking car
with 495rwhp you should be trapping at or over 104mph in the 1/8
good looking car
Trending Topics
#8
11 Second Club
iTrader: (33)
Join Date: Mar 2004
Location: Tampa, FL
Posts: 1,672
Likes: 0
Received 0 Likes
on
0 Posts
A 98 MPH 1/8 does not equate to a 130 MPH 1/4...not sure where you got that from. I'd say get your clutch sorted out and you'll be MUCH quicker. For the record, In 2500+ DA my 350rwhp car still traps 89-90. With 145rwhp more you should be at 100+ in the 1/8.
#14
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Dallas, TX
Posts: 1,733
Likes: 0
Received 0 Likes
on
0 Posts
Check this other thread... finally ran the 1/4. Just .01 from an 11 sec 1/4
https://ls1tech.com/forums/11-second...01-120mph.html
That was done with a 7.9@94.
As far as people saying something wrong.. nah it's hot! I expect the car to trap 124/125 when it cools down.. DA is 2500+ every day in TX summer.
https://ls1tech.com/forums/11-second...01-120mph.html
That was done with a 7.9@94.
As far as people saying something wrong.. nah it's hot! I expect the car to trap 124/125 when it cools down.. DA is 2500+ every day in TX summer.