Made it to the Club...
#1
11 Second Club
Thread Starter
iTrader: (15)
Join Date: Nov 2010
Location: Austin, TX
Posts: 881
Likes: 0
Received 0 Likes
on
0 Posts
Made it to the Club...
Test and tune night at SAR, weather was ok, kinda sticky due to storms and higher than normal temps, for this time of year.
So anyway, i wanted to give the good ol nittos one more shot now that I have LCA's and panhard bar. My worst at normal PSI 2.2 60, and went 12.7 112.
Then the MPH reader quit working so i wont count a couple of pases i made. whenever they did their adjustment they mentioned it may be a lil off or turn off again.
Next Pass
12.1 2.0 60ft @ 113.4 MPH
Last pass
11.8 1.8 60ft @ 117
What's frustratin... going from 112, 113.4 to 117. And not knowing where my true trap speed is.
Based on my best time, what MPH do you think my car really is? I only had driver seat in as well. Not sure how much that helped and also put some 109.
So anyway, i wanted to give the good ol nittos one more shot now that I have LCA's and panhard bar. My worst at normal PSI 2.2 60, and went 12.7 112.
Then the MPH reader quit working so i wont count a couple of pases i made. whenever they did their adjustment they mentioned it may be a lil off or turn off again.
Next Pass
12.1 2.0 60ft @ 113.4 MPH
Last pass
11.8 1.8 60ft @ 117
What's frustratin... going from 112, 113.4 to 117. And not knowing where my true trap speed is.
Based on my best time, what MPH do you think my car really is? I only had driver seat in as well. Not sure how much that helped and also put some 109.
Last edited by LASTOFTHEBREED02T/A; 12-20-2012 at 08:21 AM.
#5
11 Second Club
Thread Starter
iTrader: (15)
Join Date: Nov 2010
Location: Austin, TX
Posts: 881
Likes: 0
Received 0 Likes
on
0 Posts
Soon I'll have something decent, and get that 1.6 60ft.
Trending Topics
#10
11 Second Club
Thread Starter
iTrader: (15)
Join Date: Nov 2010
Location: Austin, TX
Posts: 881
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys... On the 10's, well lets just hope spray can get me there before breaking anything else in the process...
Last edited by LASTOFTHEBREED02T/A; 12-26-2012 at 03:55 PM.