red_ryderSS

iTrader: (1)

My suspension mods consist of an adj bmr tq arm, relo bracket, panhard bar and eibach springs(not pro kit). My rear end is stock with 342 gears and its a m6. The power mods are in my sig. I'll prob ditch the 18 z06 motorsports and use my buddys drs on 17 inch rims. What do u guys think. First time at the track in this car, but I went a lot in my 1st gen.

Red 01SS

iTrader: (2)

You should have some solid 11sec time slips

I have a 228 cam with Patriot 243's, SS3600, and went 11.67 @ 117.41. You are making pleanty of power, just need to put it to the track

151ls1

iTrader: (1)

You should easily get a solid 11 sec pass as long as you can launch it and get it to hook up. You're making a lot more power than i am and i just barely broke into the 11s last weekend. You shouldn't have any problems.

red_ryderSS

iTrader: (1)

any of u guys on stock ten bolts with sticky tires, if so what are u guys launching at. Thanks for the input already guys.

STRIPSTAR

iTrader: (4)

I wouldnt launch too hard unless you have a 12 bolt in the wings.

red_ryderSS

iTrader: (1)

Maybe after tax returns, but I have to make it last a couple months. Do u think 2500rpms is safe with dr's to launch at?

98TADRIVER

iTrader: (36)

you should make 11s no prob, as long as u hook. i hit 11s on stock internals so you shouldnt have a problem especially with 100+ more rwhp than me lol

i was launching at 4k on street tires and blew my rear up 1.5 yrs ago
lol every 10bolt has a different attitude

red_ryderSS

iTrader: (1)

Sweet thanks for the input. Going to the track after thanksgiving weekend so I'll post up the times I get.

Red 01SS

iTrader: (2)

I'm on the stock 10 bolt with 3.23's, was using MT Street Radials to the tune of a 1.67 60'. But then again, I'm an A4 lol

dragracer44life

i have 4000 tc & running 12.4@ 110 and 1.7 60'. my 10 bolt is still solid...for now