Clark'sBadZ

iTrader: (1)

I am selling a brand new Holley Double Pumper 750cfm and a brand new GM LT1 Intake Manifold. I was converting my car over to a Carb set-up but plans changed. Both of these items are brand new and they include the gaskets for the CARB. I do not have the boxes unfortunately, but new this stuff sells for like $1100. I will let it go for $550 shipped. Part numbers are HO4779c for the CARB and 024502592 for the Intake Manifold.

Thanks,

Clark'sBadZ

iTrader: (1)

Any intrest?

Clark'sBadZ

iTrader: (1)

Nobody is swapping an LT1 into something without electronic fuel injection?

madmike9396

iTrader: (29)

What is needed to convert it from FI to carb ?

Clark'sBadZ

iTrader: (1)

Exactly what I am selling. The Intake Manifold and the Carb is what you will need. You are also going to need a Ignition Box, which I have a brand new MSD 6AL I could sell you as well. The Intake Manifold adds 30 Lbs. of torque right off the bat.

Thanks,

dogpound93

iTrader: (3)

hey do you still have the carb ? how much for the carb only

Clark'sBadZ

iTrader: (1)

Carb is $325 by itself.

Thanks,
Chris
631-252-6613

94GreenMachine

iTrader: (16)

What can you do on the intake shipped to 89117? thanks

dogpound93

iTrader: (3)

300 for the carb? were you located

TRUCKIN

iTrader: (3)

A buddy of mine put this set up on his 95. With ported stock heads and cam turbo 350 on a 355 bottom end ran 11.20 on nuts.

94GreenMachine

iTrader: (16)

What cam and rear end gears did he use to get that?

94GreenMachine

iTrader: (16)

hello? still have the intake?