2XR95Z28

iTrader: (4)

Ok so i pulled out of work today got on the gas about half throttle and then the car just shut off, no loud sound of anything just died, tried to re-start it but it just cranks and cranks and won't fire over. Started fine in the parking lot at work then randomly dies and now won't re-start...

Thinking spark? Just replaced the plugs two days ago with tr55's. Coil has less than prolly 50 miles on it. Got the opti from Larry from Speed Inc, he said it has very very low miles on it. I'm lost lol...

Any suggestions?

latindragons

That happened to me a while back too. Turned out to be the fuel pump. Can you hear it priming when you put the key in the ON position?

2XR95Z28

iTrader: (4)

yep, its a brand new bbk 255 replaced it last week, i can hear it priming and i can smell gas too....

sdotlog

Hmm... sounds familiar. Ended up replacing complete opti and ign. module. Not sure if that maybe the same for you. Same scenario when it croaked on me tho. On the way to work first thing and the morning then bam, ended up being late by a few hours. Good luck dude.

-DIABLO-

iTrader: (1)

check the icm on top of the coil i check it at autozone

99huggerorangeZ

iTrader: (2)

crank sensor

rkinney

My car has only died on me twice like that. Both times it was the ICM.

litch2004

iTrader: (1)

the last time mine died on me like that out of no where and it was my cap and rotor.

1996firebirdformula

iTrader: (3)

Was gonna say the pump but.

Pump went out on me last weekend

Spiers

iTrader: (7)

Check fuses. Exact same senario for me was a blown ignition fuse due to a wire leaning on the header.

Z28Camaro30Ann

iTrader: (15)

Same EXACT thing happened to me last week. I have MSD 6AL Ignition Control, and an MSD Coil with MSD Cap and Rotor........Cap and Rotor were installed just over a month ago. Took it to the shop they said spark was going INTO my opti, but NOTHING was coming OUT of it.

Turned out somehow my "brand new" MSD Cap and Rotor burned up. Might just be that, have someone check the input/output from your opti and see if it is getting/sending spark...if it is then at least you know its not your coil/distributor/cap/rotor/etc and can move to other things...if it is, problem solved.

LS1 SPEED

iTrader: (22)

Joe

you can't seem to catch a break man

check fuel pressure

check spark

2XR95Z28

iTrader: (4)

You have no idea haha, i dunno why my car hates me so much lol


Well looks like i got alot of things to check-

-icm
-spark
-ignition fuse
-fuel pressure

fuel pressure and spark SHOULD be good, but with my luck i have no idea. Its just weird how it started up literally two mins before it died then now it won't start again lol.

Headed into work til 9 tonight so i'll see if i'm in the mood to mess with anything tonight.

Thanks guys

AChotrod

iTrader: (17)

Sounds just like when my opti took a **** last week.

killaxtranz

iTrader: (3)

+1 on opti happend to me on the way to the track really busted my nut

2XR95Z28

iTrader: (4)

Ya i instantely thought the opti of course but like i said i got it from Larry and it has maybe 75 miles on it none of them over about 4-5,000 rpms as i have some problem that won't let the car pull past then. I highly doubt Larry would send me a crap opti lol.

AChotrod

iTrader: (17)

My opti was a brand new GM opti.

Z28Camaro30Ann

iTrader: (15)

my opti was brand new MSD cap/rotor, and brand new GM Distributor, no warning whatsoever. Driving fine at 55, no symptoms, then just died.....turned out to be a burned up cap/rotor...

joelster

I had that happen to me too. It was the aftermarket coil I put on it. I was just getting onto the thruway and it was like someone flicked a light switch, *click* and I was coasting. Luckily I still had the stock coil sitting in the back seat and swapped it out on the side of the road. Your problem definitly sounds spark related.

2XR95Z28

iTrader: (4)

That would be real sweet if it was just the coil, what is the proper way to test the coil, and to test the opti? Like i said the plugs are brand new so i know those are fine. I could replace the wires but i dont think those are what caused this...