You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join LS1Tech.com today!
Ran a 12.8 @ 114mph with a 2.2 60' on street tires.
Have to say im very disappointed. About 30 minutes later soon as i drove the car off the property it shelled a lifter. Now the motor is being rebuilt...again.
The car put down 411/370 with 317's and a 233/239 cam.
Im also running a 9" rear with 3.89's. Stick car.
Hopefully after i get my ported 5.3 heads and have my compression over 9.7:1 and some slicks it will get down into the 11's.
Sorry about the pic im not sure why it came out like that.
Im thinking it was my compression that was killing me. And weight. 317's with about 9.7:1 compression. My new setup is going to be 11:3:1 ported 5.3 heads with a eps cam.
Hopefully it runs a little better.
LMAO!! NO ITS NOT!!! i ran times in my sig on 15 yr old dry rotted tires that came off my iroc........
That is not a bad time.Look at his 60ft 2.2.Put some tires on that car he would be all in the 11's 116 to 118mph.It is just a waste of time at the track on street tires.He was running 90 thru the 1/8th which is real strong on street tires.His mph says it all.
12 sec pass on street tires. 
" 
