LS1 350z 12.5@115
#1
Teching In
Thread Starter
Join Date: Jun 2013
Location: McConnellsburg, Pa
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
LS1 350z 12.5@115
Went 12.5 @ 115 last night in my ls1 swapped 350z. This was on my 18" street tires. Mods are patriot heads,comp 224/224 581/581 112lsa cam, ls6 intake, sikky headers. I have a fully built t56 with f body gearing and 3.7 gears. Should be able to knock off a good bit more after another trip with better 60ft times.
Last edited by 04350ztour; 12-19-2014 at 05:17 AM. Reason: added videos, updated cam specs
#4
Teching In
Thread Starter
Join Date: Jun 2013
Location: McConnellsburg, Pa
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Whelp lost either a bearing or lifter 2 days after this. Think I could of shoved it in the low 12's on street tires. Maybe high 11's on a set of nitto's. gonna build the motor and go to a bigger cam.
#6
Teching In
Thread Starter
Join Date: Jun 2013
Location: McConnellsburg, Pa
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Lost the lifters, cam bearings wear starting to go to. I got the motor with the heads/cam combo. Come to find out the cam was only 224/224 581/581. Doing forged pistons/rods, bigger cam and stronger Valvetrain.
Trending Topics
#11
Teching In
Thread Starter
Join Date: Jun 2013
Location: McConnellsburg, Pa
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
New setup
Got my new setup finished yesterday with a tune. Made 430hp and 390trq. Should be moving out of the 12's easy with a new tire setup.