Bolt on A4 Trans Am 12.37 109 Mph
#1
On The Tree
Thread Starter
Join Date: Oct 2008
Location: CT
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Bolt on A4 Trans Am 12.37 109 Mph
So my last last time at lebanon valley the car had a issue with shifting into 3rd gear which was tune related and netted me some 12.80 time slips. After playing with the hp tuners and adjusting my mph lower i got the car to shift right on the money.
Mods for the car are- Lid, Longtubes, True Duals, Ptc 4500 stall, and 4.10's. Was on a 28x11.5 M/T Et street. 100% stock suspension.
60ft- 1.720
330ft - 5.053
660ft- 7.882
Mph- 87.34
1000ft- 10.314
1320ft- 12.371
Mph- 109.71
Very happy with how the car ran, its right were i was hoping it would be. The stock ls1 intake is holding me back a bit and am looking to find a ls6 to throw on there along with a few suspension pieces.
Overall my end goal is to hit 11's on the stock motor which i know is very doable. Its a very budget built car which is the best part about it.
Mods for the car are- Lid, Longtubes, True Duals, Ptc 4500 stall, and 4.10's. Was on a 28x11.5 M/T Et street. 100% stock suspension.
60ft- 1.720
330ft - 5.053
660ft- 7.882
Mph- 87.34
1000ft- 10.314
1320ft- 12.371
Mph- 109.71
Very happy with how the car ran, its right were i was hoping it would be. The stock ls1 intake is holding me back a bit and am looking to find a ls6 to throw on there along with a few suspension pieces.
Overall my end goal is to hit 11's on the stock motor which i know is very doable. Its a very budget built car which is the best part about it.
Last edited by dirkdiggler350; 05-03-2015 at 12:33 PM.
#3
On The Tree
Thread Starter
Join Date: Oct 2008
Location: CT
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
It was on wednesday night, 9/24 it was in the low 50's and da was -386 on my final pass. I think the stock ls1 intake is holding it back, ls6 intake would be nice just gotta find one.
I know my stall and gear combo is overkill for a stock motor but i did it anticipating the cam going in over the winter and only wanted to do it once.
I know my stall and gear combo is overkill for a stock motor but i did it anticipating the cam going in over the winter and only wanted to do it once.