convert 1/8 mile to 1/4 mile times? estimate?
convert 1/8 mile to 1/4 mile times? estimate? I ran for the very first time last night. And even though the track was horrible and I couldnt drive i would still like to know what my times would convert to if it was a 1/4 mile instead of an 1/8 mile.
my 60ft: 1.92
my reaction was .9211
my 1/8 time 8.551
my 1/8 mph 85.564
Thats all i can remember. I spun 3 times during this run even with traction control on.
my 60ft: 1.92
my reaction was .9211
my 1/8 time 8.551
my 1/8 mph 85.564
Thats all i can remember. I spun 3 times during this run even with traction control on.
TECH Addict
Joined: Feb 2002
Posts: 2,319
Likes: 0
From: Lewisville, Texas
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
^^ that thing was pretty close for my car
Your 1/4 Mile ET is 12.76 seconds computed from your vehicle 1/8th ET of 8.141 seconds.
Your 1/4 Mile MPH is 103.97 MPH computed from your vehicle 1/8th MPH of 83.85 MPH.
Actual 1/4 was 12.783@105.65
Your 1/4 Mile ET is 12.76 seconds computed from your vehicle 1/8th ET of 8.141 seconds.
Your 1/4 Mile MPH is 103.97 MPH computed from your vehicle 1/8th MPH of 83.85 MPH.
Actual 1/4 was 12.783@105.65
When I had a stock stall that chart matches perfectly, but now that I can get out of the the better I'm a little faster in the 1/8 than the chart says based on my 1/4. Still only about .2 off, though.
Almost right on for mine too.
About .08 off the list above.
60 ft - 1.760
1/8 - 7.554@97.93
1/4 - 11.703@116.08
60 ft - 7.061
1/8 - 7.52@97.80
1/4 - 11.674@114.92
Apparently hurt the motor that day, pressure in the crank case and 5 and 7 @ 85 psi. Should run good on all 8.
About .08 off the list above.
60 ft - 1.760
1/8 - 7.554@97.93
1/4 - 11.703@116.08
60 ft - 7.061
1/8 - 7.52@97.80
1/4 - 11.674@114.92
Apparently hurt the motor that day, pressure in the crank case and 5 and 7 @ 85 psi. Should run good on all 8.
