00 black ss

iTrader: (9)

im looking to get a eps cam in my 383. i previously had the ms3 and want something a little bigger and little more choppy. has anybody ever ran this cam? how do you like it or how would it perform with my setup? 1 7/8 headers, 243 heads, ls6 intake, uderdrive pulley and a 200 shot of spray. any vids of this cam? also what other cams would you reccomend for me that is bigger and more choppy then the ms3?

00 black ss

iTrader: (9)

bumpp... anyone have any input bout this cam? or suggest a cam like it

Damian

iTrader: (89)

You're not going to find a lot of info on that cam yet since Geoff's designs are still fairly new. He makes good stuff and spec's cams out the right way rather than the "lets throw this together and see if it works" approach, so I think you'll be fine.

SteveB4C

So did you have the MS3 in the 383ci or in its stock form. im looking to do a stroker also and im gonna start with heads and cam but im trying to find a cam that will work now and with the longer stroke of the 383ci.

LilJayV10

iTrader: (39)

Let Geoff or Patrick g spec you a cam. Don't just throw something in it.

02*C5

iTrader: (1)

i agree go to the people who have proven themselves in making and grinding cams that perform. Ed Curtis should be on that list also.

LilJayV10

iTrader: (39)

Yeah Pat G spec'd me a "small" cam. I got the specs and thought, "oh I need a bigger cam than that!" It's hard not to get caught up in the bigger is better. I can't wait to order it and get it in the car.

Paint_It_Black

iTrader: (1)

You are going to have a hard time finding a better cam than that.

Paint_It_Black

iTrader: (1)

um, Geoff is the owner of eps, that's one of his grinds. That's his "t-rex killer"

Pat is still learning, but he's getting better.

LilJayV10

iTrader: (39)

Be sure to tell him that.

orangeapeel

iTrader: (18)

you will have a hard time having others agree with you.

Paint_It_Black

iTrader: (1)

I've got my own custom grind. I call it "the stick snapper." Very similar to Geoff's cam. I was very surprised to see someone else "get it" too.

BAD2000TA

iTrader: (6)

I would like to find out, too. I've been thinking about a bigger cam for my 383. What I like about the EPS cams is that they are less noisy compared to others. That's a key selling point to me.

tillery

iTrader: (4)

He sent me a 226/234 on a 111+3 but I DD my car and dont see much of the strip anymore. I had run the MS3 and the vindicator(240/244) for a while. I may use the vindicator in a stroker soon but for my street car I know I will be happy with this grind. I had PRC 2.5 LS6 heads and now switching to TF220s. Be a while before it gets tuned and on the street.

Nitroused383

iTrader: (10)

Are you serious? Why would you say that

02*C5

iTrader: (1)

Not everyone is going to agree with you. That's the beauty of this site. Nothing is taken personal and everyone gives their opinion depending on their experiences. I run one of his cams and I am happy with the results. New numbers soon after the N20 install i just did.

00 black ss

iTrader: (9)

would a 248/254 cam be to big for a 383?

87silverbullet

iTrader: (11)

With that big of a cam in a 383 rear gears would have to be deep whether 6 spd or auto and with an auto 4000+ stall.

00 black ss

iTrader: (9)

im a 6speed. currently i have 4.10s debating wheter or not to put in 4.30s when i get a 9 inch

JPH

iTrader: (2)

Leave this profile for your 402/408 your building imo.