Can you convert a corvette trans into a camaro trans?
07-05-2010, 04:14 PM
#1
Teching In
Thread Starter
Join Date: Jan 2010
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Can you convert a corvette trans into a camaro trans? The corvette trans is double ended.
Can you just simply unsrew the housing at the end and it looks like a normal trans or no?
I found a cheap T56 MN6 and I'm wondering if I can stick it into my camaro without a lot of work?
Anyone done this?
Can you just simply unsrew the housing at the end and it looks like a normal trans or no?
I found a cheap T56 MN6 and I'm wondering if I can stick it into my camaro without a lot of work?
Anyone done this?
07-05-2010, 05:48 PM
#3
You can convert it to a SSR-hybrid:
http://www.eecis.udel.edu/~davis/z28..._Fbody_T56.pdf
Or more easily into a GTO-hybrid. The GTO-hybrid will use some of the same ideas/costs of the SSR-hybrid write-up, but without any machine work and on a GTO mainshaft.
http://www.eecis.udel.edu/~davis/z28..._Fbody_T56.pdf
Or more easily into a GTO-hybrid. The GTO-hybrid will use some of the same ideas/costs of the SSR-hybrid write-up, but without any machine work and on a GTO mainshaft.
07-07-2010, 01:09 AM
#4
Teching In
Thread Starter
Join Date: Jan 2010
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
So I have to change out the actual trans internals?
Ouch, i'll pass on that.
I thought it was just maybe like a 4 inch plate that had a shaft inserted through going into a regular t56 trans to make it double ended.
Ouch, i'll pass on that.
I thought it was just maybe like a 4 inch plate that had a shaft inserted through going into a regular t56 trans to make it double ended.
07-07-2010, 12:01 PM
#6
Now thats cheap to some people, not saying thats the case here.
