Coyotesa

iTrader: (1)

This seems like the right spot to put this as it would fall under body work. I have a 95 Trans am and the back window is chipped and looks ugly. Now i have found a guy that has a firebird hatch with the low spoiler and coming from a third gen trans am i know swapping the back panel was not too hard. But new to the fourth generations can anyone tell me how hard the glass is to swap? I want to remove both back panels and swap the firebird glass onto my car and put the back panel and spoiler onto it. Also the firebird glass is like 95-98 not sure, pretty sure its an exact fit.

Again i have done this with third gens where its a couple bolts and some black tar sealent which wasnt to bad.

Thanks in advance.
-Buddy-

Hartje

iTrader: (1)

The glass is the same on all the 4th gen rear hatches.

somebody else will have to chime in on the sploiler, I'm 92.85% sure that T/A spoiler and the low profile firebird spolier have different mounting holes.

Coyotesa

iTrader: (1)

I dont want to just change the spoiler i want to change the whole back panel where the spoilers sit. Also it looks like the firebird spoiler is the whole back hatch.

-Buddy-

sjsingle1

iTrader: (1)

the TA hatch and the firebird hatch both bolt up the same.......but they are totally different.......but still share the same glass.......is that that the answer?

wabmorgan

Yes... they have the same glass. The firebird spoiler is built in to the hatch and can not be removed.

Coyotesa

iTrader: (1)

Ok let me see if i can explain this right, i want to remove the back panel from the glass both of them and put my t/a panel on the firebird glass just need to know if that is possible.

-Buddy-

Coyotesa

iTrader: (1)

The picture i attached i circled the part i want to know if its hard to take that part off the window and switch it with the part from the t/a (not just the spoiler but what the spoiler is sitting on both firebird and trans am). hopefully this clears things up.

-Buddy-

bigj2717

iTrader: (15)

You can not take that off and switch it with a TA. The formula hatch is all built together. You can swap the glass or the whole hatch

Coyotesa

iTrader: (1)

Ok, I think that is my answer the glass will come apart from the spoiler on a firebird.

Thank you.
-Buddy-

BURN'EM

iTrader: (11)

The epoxy used for rear hatch is tough. It is part of the cars support it would be netter to find a ta glass and wing. Or have a glass company put one in for you but oem is better

Coyotesa

iTrader: (1)

Ah, that sucks its hard to find t/a hatches.

-Buddy-

BURN'EM

iTrader: (11)

Fill out a request on junkyarddogs.com. you're in TX so you should have quite a few there.

kacivic

iTrader: (2)

if i was closer to being able to afford paint, i'd offer to do a trade. i'd rather have the firebird spoiler than the T/A, so a swap would be cool with me.

if you wouldn't mind doing some cash on top, send me a PM. if you're interested i'll get some pics for you. i'm in houston, so it wouldn't be too hard to drive and meet you, if you're still in SA.