New best for my cam only carbed lq9
Cool vids man...it sounds great. In the nitrous video, you can hear the tone of the motor change (when the spray hits) about 10ft before you reach the 60' cone. Definately drop that window switch down and I'll bet you'll see a nice gain in your 60' and in your 1/8th ET. Only problem is you'll likely run out of RPM even sooner with those gears in the 1/4.
Thread Starter
10 Second Club
iTrader: (1)
Joined: Apr 2009
Posts: 135
Likes: 0
From: Jonesboro, Arkansas
Yea you can also hear it hit the rev right at the 1000ft mark. The front end comes down when I let off and then I got back on it. I think a gear change will be coming in the future.
i didnt read the whole thread but one thing i saw in both the videos that i would say to try not to do the 1st gear spin in the water before the burn out. it flings water up in the wheel wells and it drips back on to the tires while your staging. you motor is making enough power to pull the burn out with what ever water gets on the tires from just rolling thru the box. just my 2 cents. looks good tho.
