Sumbalt1

I have a 94 lt1 camaro with a 4l60 transmission.
Let me start by saying before I put my gears in the rear end I did not think anything was wrong with it. But than once I put the 4.10 gears in my friend told me that my car only shifting in to two gears.so if I have to rebluild it how much should I have to pay I'm not looking to go really fast just basic, hotcam plus full bolt ons and I have a hypertech power programmer 3. Help maybe it's not my transmission maybe it is.

blackjack325

iTrader: (1)

just get it rebuilt to hold abuse and you shouldnt have a problem.

looking at about 1200-1500 for a rebuild

ahritchie

iTrader: (1)

Did you get a tune for these 4.10's??? Doesn't sound like it...that could be your whole problem. Either figure out how to tune it for 4.10's on the hypertech programmer or get a tune

Sumbalt1

no i never got it tune for 4.10 gears yet, because my hyper-tech programmer is not reading my computer, he said i might need a pcm plug the one under the steering wheel that you connect to check your check engine light. We took it to autozone to see if there reader will read it and that did not work.

ahritchie

iTrader: (1)

LMAO what is autozone going to do about your hypertech POS? Autozone is not a tuner for LT1 PCMs lol; they have great alternator selection however You need a real mail order tune by a reputable tuner such as PCM for less if that 90's relic no longer works.

defaultexistence

iTrader: (11)

Taking the trans in/out yourself will knock off alot of labor.. $400+

Badazz 97 TA

iTrader: (18)

Get a tune for the gears. The pcm doesnt know what to do right now with those gears. does it shift at all during normal driving?

Sumbalt1

I bought a hypertech power programmer 3 (30026) and i put it on the car and it read ( can not respond to computer) what should i do next...

ahritchie

iTrader: (1)

Get a real mail order tune as previously suggested by me and others...and get some better reading comprehension skills. Like talking to a brick wall over here

Sumbalt1

Ok... But I need help not someone talking to me like I'm ******* stupid... I served my country, been overseas did more than most and I'm only 22. So what place can I mail my PCM to.

whytryz28

iTrader: (28)

PCM4less or MadZ28 will tune it.

MasterTomos

iTrader: (15)

Is your hypertech prgrammer for OBD1 computers or OBD2? Your car would be OBD1 but I know in '95 that the computers were OBD1 but the underdash connector was an OBD2 connector, which confuses the **** out of people. Im not sure if late '94 cars had OBD2 connecters like the 95's did or not. Nevertheless, those hypertech programmers have a terrible rep around here, just so you know.

Also, disregaurd grumpy people on here.

PCMForless and Madz28/ion can tune OBD1 computers and both have a lot of feedback on here. Research them both and check them out. Im personally using Madz28.

Hope that helps some

BTC

http://madtuner.com/
http://pcmforless.com/

There are some other options for tunes as well, but those two seem to be the most commonly used.