teach me how to racecar re-wire my car.
teach me how to racecar re-wire my car. Hey guys im looking at re wiring the car. Currently i have no ecm but still have pwr windows factory lights signals and ignition. I want to remove the underhood fuse/relay block and re wire the car so i still have functioning brake turn and headlights. Whats the best way to do this any suggestions? Im not worries bout any other functions and my engine is controlled by stand alone box.
Thanks
Thanks
I was in the same situation and used a Spaghetti Menders system that was built to order. It's above and beyond a Painless harness and makes wiring ten times easier and cleaner. Another comparable system to look into is Speedwire.
Here's some older pictures of the cubes mounted on my dash bar (scroll through to see more). The one on the left controls the ignition, starter, bump start, computer power, etc. The second one is the nitrous controller which was built into the system. The third ties all the cubes together from the front, middle, and rear using computer cable. The switch panel has just one computer cable running from there to the last cube.
here's all you need to know:
http://www.racewiresolutions.com/
he's a F-body owner and racer so you know it is done right. need any more info call or pm me
http://www.racewiresolutions.com/
he's a F-body owner and racer so you know it is done right. need any more info call or pm me
here's all you need to know:
http://www.racewiresolutions.com/
he's a F-body owner and racer so you know it is done right. need any more info call or pm me
http://www.racewiresolutions.com/
he's a F-body owner and racer so you know it is done right. need any more info call or pm me
This ^^^^
Trending Topics
Teching In
Joined: Jul 2012
Posts: 16
Likes: 0
here's all you need to know:
http://www.racewiresolutions.com/
he's a F-body owner and racer so you know it is done right. need any more info call or pm me
http://www.racewiresolutions.com/
he's a F-body owner and racer so you know it is done right. need any more info call or pm me
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
TECH Resident
iTrader: (46)
Joined: Dec 2001
Posts: 821
Likes: 0
From: Some where in the Corn Fields of Illinois
here's all you need to know:
http://www.racewiresolutions.com/
he's a F-body owner and racer so you know it is done right. need any more info call or pm me
http://www.racewiresolutions.com/
he's a F-body owner and racer so you know it is done right. need any more info call or pm me
here's all you need to know:
http://www.racewiresolutions.com/
he's a F-body owner and racer so you know it is done right. need any more info call or pm me
http://www.racewiresolutions.com/
he's a F-body owner and racer so you know it is done right. need any more info call or pm me
Have to second, third, fourth, or whatever. I've got his setup on my car and it simply doesnt get any nicer! I've seen ALOT of racecars wiring and Brian's is seriously top notch stuff. It's alittle more front end investment but totally worth it in the long run for peace of mind.
Look into Bussman Blocks. They are relay distribution blocks that can pretty much be wired to control the whole car out of one box, Waytech carries them and they have several different sizes. Racewire uses them on his installs also. M22759/16 is the wire you would want to use.(mil-spec wire)
Thats just some small details, wiring a car by yourself correctly takes alot of skill, research and planning.
Thats just some small details, wiring a car by yourself correctly takes alot of skill, research and planning.
