Jadedbird

iTrader: (27)

I only found 1 thread an the directions were sub par and the pictures had been deleted.

So i was wodering if anyone knows how to do this?
I was thinking about fabing a "bucket" to place them in so that i wouldnt have to worry about driving when its rainig

Jadedbird

iTrader: (27)

????????????????????????

Jadedbird

iTrader: (27)

Bump.

Streetlegal?

iTrader: (25)

I plan on doing something with mine since I have the engine and everything out. I'll take a bunch of pictures and make something if no one chimes in.

RJDio

Cant you just fabricate something to encapsulate the existing box? Or do you have to move it due to mods or upgrades? They sell small "pelican" cases (w/ water/air tight lids), for carrying volt meters, electronic parts, etc. I'm thinking buying the size you need, cutting base out as needed, mount and insulate, re-attach case lid to encapsulate the box, seal it and drive through a monsoon and still dry!

Jadedbird

iTrader: (27)

Thats what i am thinking. I just want to move it down just to open things up

lemons12

iTrader: (71)

I did it on the pewter car.. I won't be doing it on the red car.

Jadedbird

iTrader: (27)

Any particular reason why?

FrankSS

iTrader: (18)

i just did mine.... i will get the few pics of it up that i took when i get a chance. I kept on trying to remember to get pics of the harness while it was out of the car, but i kept forgetting until i got it all back in the car. I removed all the unneeded wires that was in the harness and ended up getting rid of a few plugs up top also, just had to repin a couple connectors.

lemons12

iTrader: (71)

After I got them down there, I didn't mind them being there. If you aren't going to make a cover for that spot, I don't like it.

Just personal opinion.

Jadedbird

iTrader: (27)

Well a guy sells covers on here plus it wouldnt be hard to fab a sheet up. Its what i plan to do.

Theres just so much **** under the hood. I would love to ditch the a/c but maybe at a later date

lemons12

iTrader: (71)

Im just going to clean up the boxes in their stock location.

Blownbayou

iTrader: (7)

My cover...... Fuse box cover off of a Sierra. Cut to fit................. Hurst emblem is gone now Did not like the look

RJDio

^^^
that looks clean and modern. nice job.

Randy WS6

iTrader: (69)

Is this what your talking about, hiding the wiring harness

BIG_MIKE2005

iTrader: (116)

LOL, Randy. Good to see you still around here man. Good lord that engine bay look killer now, but I think your relocation is above what he is wanting to do, LOL. I'm thinking he just wants to move it down without cutting & extending the harness.

Randy WS6

iTrader: (69)

Yes it was time consuming, lol....

LT1TA

iTrader: (17)

I really want to do the same (turbo car), but i am not fluent with wiring. And I will quickly put dents in my car.

black06g85

iTrader: (6)

relocated mine behind the glove box, I'll see If I can dig up some pics tonight, not pretty, but it's behind the dash so you don't see it anyway. Went through a hell of a lot of time and wire

BlackBirdDaddy

iTrader: (16)

Here is mine. Crappy pics, but you may get the idea.