which is the best torque wrench
01-27-2005, 04:07 PM
#2
TECH Addict
iTrader: (4)
Join Date: Sep 2002
Location: Boise, ID
Posts: 2,542
Likes: 0
Received 0 Likes
on
0 Posts
I have a craftsman one and two SnapOn ones, the craftsman one seems to work fine, I would get the 25-150 clicker craftsman reversable 1/2in drive one that costs about $70
01-27-2005, 04:33 PM
#3
12 Second Club
iTrader: (55)
Join Date: Jul 2002
Location: Raymore, MO
Posts: 1,785
Likes: 0
Received 0 Likes
on
0 Posts
I had a craftsman that broke. Guess what? Craftsman does not warranty torque wrenches. BITCHES!
So now I have two Husky torque wrenches that seem to work good. $50 each from Home Depot.
I'd guess that Snap On is among the best though.
So now I have two Husky torque wrenches that seem to work good. $50 each from Home Depot.
I'd guess that Snap On is among the best though.
01-27-2005, 07:36 PM
#4
I have 2 snap ons and a Mac they both work really well, I use them everyday on very expensive componets.. I have used a Craftsman a few times and it also worked well although I didnt really like the feel of it(plastic handle vs knurled steel) depending on your intended usage spend the extra money and get a quality peice..
01-30-2005, 03:53 PM
#6
12 Second Club
iTrader: (3)
Join Date: Jan 2005
Location: League City, TX
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
my cup of tea Being as this is what I do for a living, is calibrate test equipment. Here is a profesional opinion. CDI makes good wrenches that stay fairly accurate over extended period of time. Snap on is really good quality stuff. Craftsman will warranty them as long as they are BROKEN. But they will not warranty them if they fall out of calibration.(being that it is a wearable knuckle or a spring that wears out) But if it breaks as per say any other craftsman might break you can force the issue and get them replaced. Did it a bunch for the Air Force. If you drop it..which I know you will, it will be out of spec, 9 times out of 10.
Trending Topics
02-02-2005, 08:00 AM
#8
12 Second Club
iTrader: (4)
Join Date: Aug 2004
Location: Cape Cod, MA
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
Actually there is a 90 Day Warrantee on the Craftsman TQ Wrenches. I found out the hard way 
TX Tahoe Z71 - That sig is WAYYY to big man... nice Bronco, but I dont like having to scroll all the way down just to read the next post.
TX Tahoe Z71 - That sig is WAYYY to big man... nice Bronco, but I dont like having to scroll all the way down just to read the next post.
02-02-2005, 12:20 PM
#10
12 Second Club
iTrader: (3)
Join Date: Jan 2005
Location: League City, TX
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
Craftsman I have had craftsman replace several torque wrenches that were definitly older than 90 days. Like I said if you force the issue of manufacturers defect and not accuracy or calibration issues then they will usually replace them. Example-handle breaks or locks up.
02-02-2005, 03:25 PM
#11
TECH Junkie
iTrader: (28)
Join Date: Nov 2004
Location: Houston, Texas
Posts: 3,706
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NateLS1
TX Tahoe Z71 - That sig is WAYYY to big man... nice Bronco, but I dont like having to scroll all the way down just to read the next post.
Also, an 
for me. Last edited by TX Tahoe Z71; 02-02-2005 at 03:31 PM.
02-11-2005, 03:36 PM
#12
TECH Regular
Join Date: Oct 2003
Location: Miami, FL
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
02-11-2005, 06:26 PM
#13
Launching!
iTrader: (16)
Join Date: Jan 2005
Location: Huntington Sta., NY
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
by far the snap-on are the best that I have had, the Craftsman are nice though for home owner use. The reason there isnt the lifetime warrenty is if you break if you were miss handleing the tool, I.E. you didnt use it for its intent, its build to handle what its torque range is marked for.
02-27-2005, 06:51 PM
#16
TECH Resident
Join Date: Oct 2004
Location: TAMPA by way of MIAMI!!!
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
I've got a Snap on that I bought many years ago (about 10) and I've built a couple of engines with it and tourqued a bunch of wheels. Allways seems like it's good but I also wanted to get it recalibrated and went to a Snap on truck and the guy wanted like $150 to calibrate it I decided I'm not gonna worry until it's time to build another engine.
03-13-2005, 08:41 PM
#20
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,605
Likes: 0
Received 6 Likes
on
6 Posts
Clickers are untrustworthy. I also had a dial type that went
slowly insane. A beam type, though, is not easily fooled or
hurt. Only downside is lack of ratchet action on the old
school beam torque wrenches. That hurts in tight places.
If you have a clicker then you can use a beam wrench to
check cal in a rough sort of way.
slowly insane. A beam type, though, is not easily fooled or
hurt. Only downside is lack of ratchet action on the old
school beam torque wrenches. That hurts in tight places.
If you have a clicker then you can use a beam wrench to
check cal in a rough sort of way.
