Wheels & Tires Forged | Billet | Cast | Radials | Slicks

Post up pics of your lowered Trans-Am please!!

Old 05-04-2005, 12:04 AM
  #1  
TECH Fanatic
Thread Starter
 
Slammed-am's Avatar
 
Join Date: Aug 2004
Location: NW Houston/Nacogdoches, Texas
Posts: 1,330
Likes: 0
Received 1 Like on 1 Post

Default Post up pics of your lowered Trans-Am please!!

I'm in the market for springs. I'd like to see many pictures of lowered Trans-Ams.

I have 17"x9.5/11" Fikse FM/5 Wheels. I'd prefer pictures of T/A's with this size combo and lowered. I'd like variety of examples like DMS, BMR, Hotchis, G2, Eibach, etc.

The pictures you guys post for me will greatly influence my decision!!! As far as how I want the car to look, I'd prefer a little raked look, (Hotckis springs) but I don't want the springs to not lower the car enough.

this is how the car sits now...




Please help me slam my car!! (C'mon just post ONE pic for me!!!)
Old 05-04-2005, 12:06 AM
  #2  
TECH Fanatic
Thread Starter
 
Slammed-am's Avatar
 
Join Date: Aug 2004
Location: NW Houston/Nacogdoches, Texas
Posts: 1,330
Likes: 0
Received 1 Like on 1 Post

Default

Mods please move to appearance section if necessary.
Old 05-04-2005, 12:07 AM
  #3  
TECH Addict
iTrader: (3)
 
Onyx Z's Avatar
 
Join Date: Jan 2003
Location: Houston/College Station, TX
Posts: 2,584
Likes: 0
Received 0 Likes on 0 Posts

Default

Sportlines.
Old 05-04-2005, 12:10 AM
  #4  
TECH Fanatic
Thread Starter
 
Slammed-am's Avatar
 
Join Date: Aug 2004
Location: NW Houston/Nacogdoches, Texas
Posts: 1,330
Likes: 0
Received 1 Like on 1 Post

Default

Heh, don't wanna go TOO low either.

Help me out, guys!
Old 05-04-2005, 12:11 AM
  #5  
TECH Fanatic
Thread Starter
 
Slammed-am's Avatar
 
Join Date: Aug 2004
Location: NW Houston/Nacogdoches, Texas
Posts: 1,330
Likes: 0
Received 1 Like on 1 Post

Default

Post em' up!

Dig through your hard drive!

E-mail me!

Catch me on Aim!: Atomzzzz
Old 05-04-2005, 12:47 AM
  #6  
TECH Fanatic
iTrader: (6)
 
transambandit's Avatar
 
Join Date: May 2004
Posts: 1,893
Likes: 0
Received 0 Likes on 0 Posts

Default



suspension tech springs, but stock 16" wheels, sorry i have yet to presuade the wife to let me get rims/tires
Old 05-04-2005, 01:27 AM
  #7  
TECH Apprentice
 
setxws6's Avatar
 
Join Date: Oct 2003
Location: Lumberton, TX
Posts: 396
Likes: 0
Received 0 Likes on 0 Posts

Default

I have BMR 1 inchers. I like um. Bling Bling




Old 05-04-2005, 01:33 AM
  #8  
TECH Apprentice
 
setxws6's Avatar
 
Join Date: Oct 2003
Location: Lumberton, TX
Posts: 396
Likes: 0
Received 0 Likes on 0 Posts

Default

Oh and they're 17x11 on 315's.


Old 05-04-2005, 01:52 AM
  #9  
TECH Fanatic
iTrader: (17)
 
98_1LE's Avatar
 
Join Date: Dec 2001
Posts: 1,101
Received 1 Like on 1 Post

Default

LG G2 springs

SLP Level 1 kit

Bone stock

Eibach Pro-kit

Action 1 G2

Action 2 prokit

Action 3 SLP Level 1

Smoke em if you got em prokit

Just get the G2 springs. LG is making them again.

Thats all I have to say about that....

EDIT: Well maybe not all
17x11's with 315/35/17 on all four front

17x11's with 315/35/17 on all four rear

front tire
Old 05-04-2005, 05:23 AM
  #10  
TECH Regular
iTrader: (10)
 
98dropta's Avatar
 
Join Date: Aug 2003
Location: owensboro, ky
Posts: 405
Received 20 Likes on 13 Posts

Default

you dont want to go this low do you
http://www.angelfire.com/pro2/98dropta/nathan


streettrends air ride
Old 05-04-2005, 07:23 AM
  #11  
TECH Addict
iTrader: (11)
 
No Juice's Avatar
 
Join Date: Jan 2003
Location: Minnesota Corn Fields
Posts: 2,451
Likes: 0
Received 9 Likes on 8 Posts

Default

Here are three for ya
I don't have 17x11's but maybe this helps.
I have QA1's on all four corners in these pics other than the stock one. For some reason the oil filled shocks allow the car to sit lower than the gas charged shocks. The pic with the Prokit looks more like sportlines. The pic from 4-24-05 has the stock rear spring in there with a heater hose on the top coil. I also had BMR's in the rear for a while but didn't get any pics. It measured about 1/4" to 1/2" lower in the rear than it sits now but the ride was much harsher.
Attached Thumbnails Post up pics of your lowered Trans-Am please!!-stock.jpg   Post up pics of your lowered Trans-Am please!!-qa1-prokit.jpg   Post up pics of your lowered Trans-Am please!!-car4-24-05.jpg  
Old 05-04-2005, 08:34 AM
  #12  
TECH Addict
 
XtinctHawk02's Avatar
 
Join Date: Nov 2003
Location: Cypress, TX USA
Posts: 2,378
Likes: 0
Received 0 Likes on 0 Posts

Default

Hotchkis springs

Old 05-04-2005, 08:36 AM
  #13  
TECH Resident
 
Shane's Avatar
 
Join Date: Jan 2002
Location: central TX
Posts: 859
Likes: 0
Received 0 Likes on 0 Posts

Default

I have Granatelli springs, w/Koni SA's up front and revalved Bilsteins out back. 17x9.5 & 17x11 wheels. There are several pics in this album, but here's one that shows the stance pretty well:
SOM WS6 w/Granatelli Springs
Good luck...
Old 05-04-2005, 08:50 AM
  #14  
On The Tree
 
LS1POWER98's Avatar
 
Join Date: Feb 2004
Location: mn
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
Default

rk sport springs 1 3/4'' front and 2'' in back looks really good!!! trust me look'em up!those hotchkis look good too but i think his rims are 19s..but if you have 18s these rk sport ones will look awsome on your ride slammed trans am!!
Old 05-04-2005, 10:20 AM
  #15  
Sold The Fun Stuff :(
iTrader: (1)
 
josh99ta's Avatar
 
Join Date: Nov 2001
Location: Nashville, TN
Posts: 2,371
Likes: 0
Received 0 Likes on 0 Posts

Default

Eibach Pro Kit, Bilstein HD shocks...

Old 05-04-2005, 10:40 AM
  #16  
TECH Resident
iTrader: (1)
 
SLPHawk300's Avatar
 
Join Date: Sep 2004
Location: Chicago, IL
Posts: 848
Likes: 0
Received 0 Likes on 0 Posts
Default

Eibach Pro Kit w/ Bilstein HD shocks





I hope this helps some. It seems that most go with the Pro kit from Eibach, or the Ground Control set-ups, but those are quite expensive, i will do those hopefully some day!
Old 05-04-2005, 11:09 AM
  #17  
Banned
 
98'MidnightBlueBird''s Avatar
 
Join Date: Jan 2004
Location: Valencia, CA
Posts: 369
Likes: 0
Received 0 Likes on 0 Posts
Default

B&M Springs.... about a 1.75 drop all around.... Bilstein HD re-valved shocks.


Old 05-04-2005, 12:02 PM
  #18  
TECH Addict
iTrader: (48)
 
a98ws6's Avatar
 
Join Date: Aug 2003
Location: KCMO
Posts: 2,273
Likes: 0
Received 1 Like on 1 Post

Default

Pics in my Cardomain. LG Hypercoil springs.
Old 05-04-2005, 12:06 PM
  #19  
TECH Senior Member
iTrader: (4)
 
01 Red WS6's Avatar
 
Join Date: Dec 2003
Location: Arlington TX
Posts: 5,276
Likes: 0
Received 0 Likes on 0 Posts
Default

BMR springs. For some reason mine looks lower than others that have BMR springs. These pics were the day after install so they hadn't settled yet so it looks a little higher than they are now. I'll get some new pics once it stops raining and I can get the car cleaned up




Old 05-04-2005, 02:26 PM
  #20  
TECH Apprentice
 
setxws6's Avatar
 
Join Date: Oct 2003
Location: Lumberton, TX
Posts: 396
Likes: 0
Received 0 Likes on 0 Posts

Default

01 red ws6, those look pretty close to what my BMR's are like. I still have my stock shocks. How about you.

Thread Tools
Search this Thread
Quick Reply: Post up pics of your lowered Trans-Am please!!



All times are GMT -5. The time now is 03:48 PM.