which port on master cylinder goes to the rear brakes?
09-04-2005, 03:55 PM
#1
Teching In
Thread Starter
Join Date: Sep 2005
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
which port on master cylinder goes to the rear brakes? I have C5 brakes and LS1 rear brakes on my 71 firebird. I also have a LS1 master cylinder, currently i have the port on the master cylinder closest to the firewall going to the rear brakes nad the port closest to the radiator going to the front, but recently I was informed this coudl be incorrect. Is this true? is the rear port for the front brakes? Also the brakes feel pretty good, I have hydroboost also. Could this cause a problem? obviously i will just redo the lines if it is wrong. Thanks!!
09-10-2005, 12:58 AM
#5
Teching In
Thread Starter
Join Date: Sep 2005
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I just did some searches and it seems most people put their line locs in the rear port, meaning the rear port is for the front brakes, meaning mine is backwards, I am wondering though, if the master cylinder really cares front/rear? If it puts out the exact same pressure front and rear?
09-10-2005, 01:08 AM
#6
TECH Resident
Join Date: Dec 2001
Location: Mehlingen, Germany
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
Disregard my Post Man. I told you erroneous info . I got confused and edited it and it came up wrong. i am now deleting that stuff.
Youare correct the rear port (the one closest to the firewall) is for the front brakes.
Youare correct the rear port (the one closest to the firewall) is for the front brakes.
