Car won't start after PCM reset
10-27-2005, 11:03 PM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: St Louis, MO
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Car won't start after PCM reset Well after fixing my problem with my idle, I reset my PCM...
When I was plugging my PCM IGN fuse back in (with the key off), I heard a pop noise...sounded like it was coming from the master cylinder area, but I could be wrong.
The car gets power but just turns over and over.
...also, when I usually put my car in the ON position, not cranking, I used to hear a whirring noise for a second...now nothing...Fuel Pressure is there.
I hope I didn't fk my car up.
Please help!
When I was plugging my PCM IGN fuse back in (with the key off), I heard a pop noise...sounded like it was coming from the master cylinder area, but I could be wrong.
The car gets power but just turns over and over.
...also, when I usually put my car in the ON position, not cranking, I used to hear a whirring noise for a second...now nothing...Fuel Pressure is there.
I hope I didn't fk my car up.
Please help!
