WizeAss

iTrader: (5)

Looking to kill some gear on the highway and still be able to make a few passes. Personally I like BFG Drag Radials since they last awhile. My question is whether or not you can fit a 27 inch setup on a 17inch rim without hacking the bumper or ground effects/fenders.

I do have Adj. LCAs.... panhard, and rolled fenders. I will be running a TH400 so I need to kill some gear. Car has 3.90's on a full spool w/ 35 spline axles.

Without going with 26 inch tires.... what setup will give me 27 or 28 on the TorqueThrust2 9.5/17 wheels. ???

They need to hook also!

SSmokin 01

iTrader: (14)

How about these. 28" tire. I plan on putting a set on my 17x11 TT II's to cruise around on. My 325/50 MT DR's didn't require any cutting, so I don't see why these would either.



# M&H Drag Radial Tire 325/45R17
# Rear Tire
676-ROD-05R
Tire Overall Diameter: 28.0''
Average Roll Out/
Circumference: 88''
Tire Tread Width: 10.3''
Tire Section Width: 12.1''
Wheel Diameter: 17''
Required
Wheel Width: 10''

WizeAss

iTrader: (5)

I assume they will fit a 9.5 rim?

M&H Drag Radial Tire
275/50R17
Rear Tire
676-ROD-06R

Tire Overall Diameter: 28.0''
Average Roll Out/
Circumference: 88''
Tire Tread Width: 8.8''
Tire Section Width: 10.7''
Wheel Diameter: 17''
Required
Wheel Width: 9''

I assume if it didnt I could take em back and pick up a set of these?

wolfy

iTrader: (1)

m/t also has a 28" drag radial. check the catalog on their website, look for 295/45/17 in the drag radial section...