Soul TKR

iTrader: (4)

I'll probably hear a lot of **** for this... but what the hell...

I was walking through one of the aisles and happened to glance over when I noticed these tips... I started looking at it, and it's similiar to the Mecham tips and would fill in the TA rear bumper holes pretty good... can't beat the price of $44 each...

***EDIT***
check out post #34 for a nicer version!!!!

coocooknu

iTrader: (3)

Not a fan of them personally, but if you like em' go for it.

MESS

iTrader: (5)

i would have to see them on there 1st

ssgunny

iTrader: (6)

+1. It appears that it would fill in the area ok but it looks like you are getting more tip than what is needed with that big oval piece that is used to just hide the round pipe.

01FormulaTA

iTrader: (20)

would need to see them on the car before I could tell you my opinion

black01_WS6

iTrader: (13)

Well they don't look to bad for a firebird, but would be horrible on a camaro. Throw them on and take some pics.

Tainted

iTrader: (9)

get the round pipe out of it and it'll be cool

Soul TKR

iTrader: (4)

it's actually welded in there... otherwise they would be exactly like the Mecham tips...

Soul TKR

iTrader: (4)

if i remember correctly i think these are meant for Denali's/Tahoe's.... from what the tag said... but a tip is a tip so I don't think it would matter what car it went on... as long as you could get the inlet diameter to match up...

hmmmm... i wonder how much it would cost, or where i could take em for a nice polish job or chroming...

camaro_five0

it looks like they tried to make it a resonator tip with the hollow oval part on the outside of the round pipe. strange... I'm personally gonna pick up some C6 Vette tips and throw em on.

GR33N GoblinM6

iTrader: (14)

gotta love Vato Zone

217zenki

iTrader: (4)

Wwju?

ls1_doc

iTrader: (6)

The middle round piece in there is so the bigger outside part of the tip that you see does not turn blue. When stainless heats it get a small bluish tint on the end of the tip and thats what the middle piece eliminates.

joblo1978

iTrader: (14)

Should have checked with Lance Armstrong first I say.

dumpmaster

I actually like them, for the price you can't really complain.

Tainted

iTrader: (9)

im sure u can get the welds cut out

ErikElvis

iTrader: (1)

It looks like the wide pipes were slipped over some straight pipes. Like a half *** tip job. And they kinda look like that transformer shockwaves head.

Arc00TA

iTrader: (17)

I looked at these in passing, but it would be pretty ghetto to have one of those bolts back out and lose one of your "tips" on the highway.

Tainted

iTrader: (9)

thats why you tack weld them to the tail pipes

orangeapeel

iTrader: (18)

I hope you are putting those tips on a friends honda civic.