lt1 lt4 intake
lt1 lt4 intake 
05-06-2008, 08:57 PM
#2
Teching In
Join Date: Jan 2008
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
You could have them machined and welded by someone really really good at that kind of stuff but there would be no benefit whatsoever. If you have an LT4 intake you could use it on certain aftermarket cylinder heads or GM LT4 heads. Unless you have or plan on having heads that require the use of that intake you should just send it to me, besides I could use an extra.
You can learn about this issue more by searching some sites like grandsportregistry, other f-body sites etc.
You can learn about this issue more by searching some sites like grandsportregistry, other f-body sites etc.
05-07-2008, 10:26 AM
#4
Here is a pic GIZMO previously posted to show folks what he is saying.
If you machine the excess off the LT4 intake to make it fit LT1 heads you just ruined it as a LT4 intake and it has already been done to a lot of them because people blindly assumed it was an upgrade. At least you were smart enough to ask a question which should stop you from makign that same mistake.
If you machine the excess off the LT4 intake to make it fit LT1 heads you just ruined it as a LT4 intake and it has already been done to a lot of them because people blindly assumed it was an upgrade. At least you were smart enough to ask a question which should stop you from makign that same mistake.
