Whats the different between 2001 and 2002 and later Z06's
01-17-2006, 12:36 PM
#1
6600 rpm clutch dump of death Administrator
Thread Starter
Whats the different between 2001 and 2002 and later Z06's Ok, this question comes up frequently, so in a nutshell here are the major differences between 2001, and 2002-2004 Z06's. 2MuchRiceMakesMeSick for compiling it.
differences between 2001 & 2002 & up:
1. The LS6 engine standard in the Z06 increased from 385 to 405 horsepower. Torque increased from 385 to 400 lb-ft.
2. Front fender badges for Z06 models included the 405 HP designation.
3. LS6 exhaust back pressure was reduced by 16%
4. Cam shaft was redesigned resulting in increased lift and a 5% increase in air flow
5. Valve spring material composition was changed to increase seat load by 14%.
6. LS6 intake and exhaust valves were a new, lighter design.
7. The valve train weight was reduced by 0.81 pounds, which improved valve seating at high rpm.
8.Airflow over the LS6 MAF sensor was increased by removing grid work
9. MAF software was re calibrated
10. LS6 air cleaner housing had a larger intake
11. Wheels looked the same BUT they were cast spun instead of forged for a weight savings of 1.3 pounds per car
12. rear shock valving was changed
13. Improved clutch
14. Thicker front anti-sway bar
15. New front brake pads
16. HUD was standard (HUD was not avaliable in 2001 cars)
17. 2004 introduced a new fuel system which carries over into the new C6.
The technical details on 2001 vs 2002 can be found here.
http://www.idavette.net/hib/02ls6/index.htm
differences between 2001 & 2002 & up:
1. The LS6 engine standard in the Z06 increased from 385 to 405 horsepower. Torque increased from 385 to 400 lb-ft.
2. Front fender badges for Z06 models included the 405 HP designation.
3. LS6 exhaust back pressure was reduced by 16%
4. Cam shaft was redesigned resulting in increased lift and a 5% increase in air flow
5. Valve spring material composition was changed to increase seat load by 14%.
6. LS6 intake and exhaust valves were a new, lighter design.
7. The valve train weight was reduced by 0.81 pounds, which improved valve seating at high rpm.
8.Airflow over the LS6 MAF sensor was increased by removing grid work
9. MAF software was re calibrated
10. LS6 air cleaner housing had a larger intake
11. Wheels looked the same BUT they were cast spun instead of forged for a weight savings of 1.3 pounds per car
12. rear shock valving was changed
13. Improved clutch
14. Thicker front anti-sway bar
15. New front brake pads
16. HUD was standard (HUD was not avaliable in 2001 cars)
17. 2004 introduced a new fuel system which carries over into the new C6.
The technical details on 2001 vs 2002 can be found here.
http://www.idavette.net/hib/02ls6/index.htm
01-24-2006, 09:54 AM
#3
Teching In
Join Date: Apr 2005
Location: Pemberton, NJ
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
cool, what do most non z06, ls1 c5s dyno bone stock? so is one z06 any faster than the other assuming 2002-2003 models? how much faster is the 405hp one vs 385hp one?
02-19-2006, 12:33 PM
#5
TECH Fanatic
Here is a really good site for detailed info for each model year plus performance tests.
http://corvetteactioncenter.com/specs/z06/index.html
http://corvetteactioncenter.com/specs/z06/index.html
03-20-2006, 04:28 PM
#6
Closed ex-Sponsor Account
Join Date: Mar 2004
Location: LONG ISLAND, NY; MADE IN THE USA
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
basically it's the higher lift cam in '02 that made the bump in power, .525 to .550 lift and some more duration
the '05 LS2 uses the same specs as the '01 Z06 cam(no reluctor on the cam though, cam sensor reads off the sprocket up front)
electron blue replaced white in '02, machine silver replaced quicksilver in '04
FFS fuel system was mid year '03(pumps on top of tanks)
the '05 LS2 uses the same specs as the '01 Z06 cam(no reluctor on the cam though, cam sensor reads off the sprocket up front)
electron blue replaced white in '02, machine silver replaced quicksilver in '04
FFS fuel system was mid year '03(pumps on top of tanks)
Trending Topics
08-31-2006, 02:25 PM
#8
11 Second Club
iTrader: (1)
Join Date: Feb 2003
Location: Litchfield, IL/McGuire A.F.B., NJ
Posts: 668
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BRIAN98Z28
I am not positive...but didn't the '04 Z06 receive a carbon fiber hood from the factory?? Can someone validate this?
09-21-2006, 09:18 AM
#9
Staging Lane
Join Date: Jun 2002
Location: N. Andover, MA
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BRIAN98Z28
I am not positive...but didn't the '04 Z06 receive a carbon fiber hood from the factory?? Can someone validate this?
http://www.corvetteactioncenter.com/...06/2004cf.html
http://www.corvetteactioncenter.com/...6/z16hood.html
12-22-2006, 08:52 PM
#11
TECH Enthusiast
iTrader: (19)
Join Date: Jan 2002
Location: Houston, TX
Posts: 687
Likes: 0
Received 0 Likes
on
0 Posts
Off of the Corvette Forums:
LS6 Clutch Improvements
To withstand the greater torque output of the new engine, the LS6 clutch was redesigned. Clamp load has been increased seven percent and durability has been augmented by the following enhancements:
The clutch-driven disc was redesigned, with the flange plate thickness increased by 20 percent - from 5 mm to 6 mm . The damper springs were redesigned to increase wind-up rate, from 33 Newton-meter degrees to 35 Newton-meter degrees . Premium alloy steel wire is now used for the damper springs.
These changes ensure long life and good performance for the LS6 clutch.
LS6 Clutch Improvements
To withstand the greater torque output of the new engine, the LS6 clutch was redesigned. Clamp load has been increased seven percent and durability has been augmented by the following enhancements:
The clutch-driven disc was redesigned, with the flange plate thickness increased by 20 percent - from 5 mm to 6 mm . The damper springs were redesigned to increase wind-up rate, from 33 Newton-meter degrees to 35 Newton-meter degrees . Premium alloy steel wire is now used for the damper springs.
These changes ensure long life and good performance for the LS6 clutch.
07-03-2007, 05:11 PM
#14
TECH Regular
iTrader: (3)
Join Date: Jun 2007
Location: Lincoln, DE
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ramairfreak98ss
cool, what do most non z06, ls1 c5s dyno bone stock? so is one z06 any faster than the other assuming 2002-2003 models? how much faster is the 405hp one vs 385hp one?
07-30-2008, 04:15 PM
#18
TECH Enthusiast
Join Date: Jan 2002
Location: Helendale, Ca (SilverLakes)
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Z06 Specs ? 
