someone help with clearance issue
03-13-2012, 08:47 PM
#1
Teching In
Thread Starter
Join Date: Jul 2009
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
someone help with clearance issue i am putting a stock ls1 motor together and i just bought some ls6 317 casting prc heads that are 66cc and shaved 30 thousands i am wanting to go with the f14 highlift cam. should there be any clearance issuue's with this setup.
Seems like 
03-28-2012, 08:33 AM
#4
Teching In
Join Date: Nov 2010
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Did you take an additional .030 off or is that what they came with? I have those heads with their V3 cam which is similar to the F14 and have not had a clearance problem. However I would run the Stock gaskets since they are a little taller and not the Cometic ones.
![Ethan[ws6]'s Avatar](https://ls1tech.com/forums/customavatars/avatar139269_2.gif){kind=avatar}
