viper upgrade
12-08-2012, 06:37 PM
#1
Launching!
Thread Starter
Join Date: Oct 2012
Location: near Beech Bend race way
Posts: 219
Received 0 Likes
on
0 Posts
viper upgrade looking for a company thats has the viper input shaft machined down to fit my t56 trans.
thanks for any help
has anyone had problems with the round out on input shaft in there t56 transmission?? or bent /twisted??
thanks for any help
has anyone had problems with the round out on input shaft in there t56 transmission?? or bent /twisted??
12-15-2012, 01:45 PM
#4
FormerVendor
Join Date: Nov 2012
Location: Sacramento, CA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
-Kyle
12-26-2012, 11:00 AM
#5
tick performance has all the parts for that stuff.
http://www.tickperformance.com/ticks...transmissions/
from their website:
http://www.tickperformance.com/ticks...transmissions/
from their website:
Upgrade to Viper Mainshaft:
Includes everything that you need to convert your stock mainshaft over the much stronger Viper unit, including our Custom-length Viper 30-spline Mainshaft, Modified Speedometer Wheel, New Tremec Transmission Extension Housing (Custom-Machined for Viper Mainshaft) with no core charge, Viper-sized Output Shaft Bushing, Viper-sized Output Shaft Seal, and Yoke. This upgrade will increase the torque rating of your transmission to 550ft/lbs (rear wheel.)
Includes everything that you need to convert your stock mainshaft over the much stronger Viper unit, including our Custom-length Viper 30-spline Mainshaft, Modified Speedometer Wheel, New Tremec Transmission Extension Housing (Custom-Machined for Viper Mainshaft) with no core charge, Viper-sized Output Shaft Bushing, Viper-sized Output Shaft Seal, and Yoke. This upgrade will increase the torque rating of your transmission to 550ft/lbs (rear wheel.)
01-05-2013, 12:48 AM
#7
I know the Viper input shaft is longer than the LS1 input shaft but how are they different other than that? They are the same spline count right? I need a new input shaft and if a machined down Viper input is some how better than a replacement LS1 input shaft, I might want to go that route myself.
Or did you mean to say main shaft?
Or did you mean to say main shaft?
Trending Topics
03-04-2013, 06:15 PM
#9
Teching In
Join Date: Jan 2006
Location: Texas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Jason at texas drive train performance can do a 31 spline shaft that he has machined to fit and his prices aren't bad either. Mine has it been running great for the past few years.
