swapping a 24t reluctor to a 58t on the crank
#1
On The Tree
Thread Starter
swapping a 24t reluctor to a 58t on the crank
need to swap the 58t reluctor wheel off a killed crank to good crank thats a 24t now..whats involved...thanks Rob
#2
TECH Fanatic
iTrader: (6)
Join Date: Dec 2001
Location: LV NV
Posts: 1,114
Likes: 0
Received 0 Likes
on
0 Posts
Just buy a reluctor wheel.....They dont come off easy, and a tiny bend and youll wonder about your strange miss. The run out is like 0.008 I think.....
Fixture....and a toaster oven on broil gets it on easy.....have welding gloves
Fixture....and a toaster oven on broil gets it on easy.....have welding gloves
#4
TECH Fanatic
iTrader: (6)
Join Date: Dec 2001
Location: LV NV
Posts: 1,114
Likes: 0
Received 0 Likes
on
0 Posts
yes, they swap both ways,
but they sell a fixture to install them. I ve dont lots of em. Hotter you get them the better....some fall all they way on and will be lose for a few minutes and movable till the cool, others.....get tapped on with the fixture, ussually fairly easy seats them all the way.
but they sell a fixture to install them. I ve dont lots of em. Hotter you get them the better....some fall all they way on and will be lose for a few minutes and movable till the cool, others.....get tapped on with the fixture, ussually fairly easy seats them all the way.