Doug G

No help in last post, so I'll try here (no electric section )

Running a carbed LY6 with a cam...hooking up a Data-Logger and Innovate SSI-4.

What wire do I tap into on the MAP sensor for the logger ?

Stock 04/05 Silverado 2500HD 6.0L 1-bar sensor.

2xLS1

iTrader: (25)

.....

Doug G

OK, thank you....Mine only has 2 wires, so not being an electrical engineer.....I'm stumped.

Guess I have a 50/50 shot.

2xLS1

iTrader: (25)

Then it's not a stock 04/05 Silverado 2500HD 6.0L 1-bar sensor. Or you are mis identifying the the sensor you are talking about.

Krom

hook the sensor signal (B terminal from the sensor), to the ch+, and the sensor ground (A terminal from the sensor)to ch- for whatever channel you are using...

Doug G

OK, re-checked.
I apologize, there are 3 wires, I missed the black one due to the convoluted tubing

And thanks.

baronsmith98

iTrader: (2)

What all parameters will you be datalogging? Interested in this for my setup

Doug G

RPM
AFR
MAP
Just for now.