T/A Fog Light How To Thread Teaser
#1
T/A Fog Light How To Thread Teaser
Ok, I've pretty much finished up my fog light mod. I took out the stock 35w units and I've put in 100w KC Lites units. While I was at it I also swapped in some 8K HIDs to match my headlights. All I have left to do is a little tweaking, mainly just trimming my mounts and aiming the lights. I should have a How-To thread done in about a week.
I know I should probably be beaten with a rubber hose for letting my WS.6 get this dirty but between my full time job, college and modding my car I don't have much spare time.
Stock 35w housings.
KC 100w housings.
KC housing and aluminum bracket.
Both KC Lites installed.
Headlights and Fog Lights on, the fog lights still need to be aimed properly.
I know I should probably be beaten with a rubber hose for letting my WS.6 get this dirty but between my full time job, college and modding my car I don't have much spare time.
Stock 35w housings.
KC 100w housings.
KC housing and aluminum bracket.
Both KC Lites installed.
Headlights and Fog Lights on, the fog lights still need to be aimed properly.
#4
Very sharp man!! Def keep us updated!
How much was it for the KC's? And do they fit the 880 HID bulbs? I def need to do this to my T/A as the stock housings are lookin like ***!
-Justin
How much was it for the KC's? And do they fit the 880 HID bulbs? I def need to do this to my T/A as the stock housings are lookin like ***!
-Justin
Last edited by TooFastT/A; 11-08-2009 at 04:17 PM.