surfsideracing808

iTrader: (1)

Anyone have a set of leather door panels for a 2000 camaro they want to sell?

BashamWS6

iTrader: (8)

make your own. its cheaper and easy. thats what im doing next weekend

SS98#633

iTrader: (17)

in what color

TransWS6Am

iTrader: (41)

There are not any stock leather door panels, what are we talking about? Aftermarket?

surfsideracing808

iTrader: (1)

Black

BashamWS6

iTrader: (8)

Just buy some leather like fabric, remove your side panels, take iff the insert panels, rip iff the old fabric, cut and glue the new fabric To fit

Screamin_99

iTrader: (5)

These started out as graphite cloth in my V6 Firebird. I painted them with duplicolor vinyl paint and wraped the panel with leather from a fabirc store. It turned out great, I didn't get it pulled as good as I wanted near the handle and it had a few wrinkles, but I later got that out.

Im with everyone else just do your own.

surfsideracing808

iTrader: (1)

Well then i guess i will just do that. Anyone on here have a good write up on the how to?

nascarnate326

iTrader: (1)

Im right there with ya. If there is a good write up then I would consider it.

arapitis

iTrader: (1)

i did my old v6 firebird before. the hardest part is reattaching the pannel once the new fabric is on. the plastic tabs are melted/pressed down from the factory so removale/reinstallation is a pia...gonna do it again on my ta now but im gonna try to come up with a better way to get them back in

dually681

iTrader: (4)

Putting them back once you grind off the plastic is easy. Just use small 1 inch screws with wide washers all done.. Enjoy.