2000z77charger

I have a 2000 black z28 that I just bought and it has an aftermarket ss hood that is not cut out and I am not going to cut it out in favor of the ssra I like the ss hood but need some kind of grille or something to put where the opening should be any help would be appreciated thanks

chadroosa

iTrader: (14)

http://www.emblempros.com/other_exterior

good ****!!

2000z77charger

Thanks that's the first I've seen anything for it little more expensive than I thought tho

chadroosa

iTrader: (14)

great products, and service..

BOBS99SS

iTrader: (2)

The ss scoop was never functional,im pretty sure the ssra goes up under the airbox like the chris1313,the ws6s are the only ones with functional hood scoops,the ss is pretty much just for looks

Arctic_Z

I thought the ss hood had a curved route for the air to be directed underneath and into the lid in the front?

2000z77charger

Oh I assumed ss were functional it has ducting in the hood already the goes up by the air box but if the stock ss hoods aren't functional I could just get a stock grill overlay

zanethan

Factory SS hoods are indeed functional...

jsteele90

iTrader: (13)

^^ just not very much

zanethan

Yes the factory SS hoods have ducting that route air into the air box. The efficiency might not be the greatest but it is functional.

dragonZ28

iTrader: (32)

You need to cut an opening but leave a flange all the way around it so our grill can attach to it. You will be good to go as far as the grill peice goes.
We have them in four syles and three materials including the Onyx Black mirror material.

Thanks, Roger