When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
As already mentioned, new arm rests made of quality material or leather would be nice. If you need pictures of what's broken I can take mine apart to show you. Also, a redesigned center console would be awesome... kinda like LT4vert was working on
I would like to see someone manufacture some switchback LED running lights/ turn signals already assembled in the housing. I made these and they are bright and work great... but Ill never make another set.
I would like to see someone manufacture some switchback LED running lights/ turn signals already assembled in the housing. I made these and they are bright and work great... but Ill never make another set.
It would have been sooo much easier if I could have found some clear housings not already bonded. The heat method to seperate the housing did not work for me... so I had to butcher the back side of them leaving the mounts. they dont look good fromn the back but you cant tell from the front. The led's I found I were very specific to what I wanted. I hated the small led look you find in autoparts stores and they were not bright enough or switchback. so I found these on ebay, and just removed the housing from them. they are the exact lenght of our housing. http://www.ebay.com/itm/LED-Daytime-...NVVjdN&vxp=mtr
Hey do you guys still sell the Trans Am bezel that goes over the speedometer? I'm wanting to buy one for my Camaro. I use to see it sold but can't find it..
I'd like a fabricated brace to shore up the fiberglass in our doors. A metal plate that would come with hardware (sex bolts and mating screws would probably work fine https://en.wikipedia.org/wiki/Sex_bolt ). This would solve a lot of damaged doors and sagging windows. Here's a before and after using my crude MS Paint skills. I've had this project in mind for along time but would gladly pay to avoid the trial and error.
This + a beefier window motor sold as a kit and sign me up. Take my money.
Maybe because the product of business reliability wasnt a hit! Actually he posted a while back that he wasnt gonna renew with Tech when his stint was up, going on to bigger and better things(which I highly doubt) in the 5th,6th gen game* Dont mean to sound like a hater but every one of my dealings were just a huge PITA***
Maybe because the product of business reliability wasnt a hit! Actually he posted a while back that he wasnt gonna renew with Tech when his stint was up, going on to bigger and better things(which I highly doubt) in the 5th,6th gen game* Dont mean to sound like a hater but every one of my dealings were just a huge PITA***
IMHO; I think that issue with their 4th gen f-bodie stuff was, too expensive for development versus the actual amount of sales after development, really stop and think about how many people have 4th gen fbodies now versus 10 yrs ago, they are dyeing off, sorry to say,
YMMV...surprised people keep posting to this thread, since 6LE is no longer on this site
I'd like a fabricated brace to shore up the fiberglass in our doors. A metal plate that would come with hardware (sex bolts and mating screws would probably work fine https://en.wikipedia.org/wiki/Sex_bolt ). This would solve a lot of damaged doors and sagging windows. Here's a before and after using my crude MS Paint skills. I've had this project in mind for along time but would gladly pay to avoid the trial and error.
Originally Posted by OffspringZ28
This + a beefier window motor sold as a kit and sign me up. Take my money.
This isn't a want, it's a necessity! I find it strange that no one has come up with a better setup, by now. We definitely need new window motors!
I'm on my fourth passenger window motor in 13 years.
If I'm not mistaken there is an electrical kit that is available. It eliminates the power loss on the passenger side .... extends the life of the struggling motor.
03-05-2017, 01:21 PM
