Z28Venom

iTrader: (13)

Well.. I've done the suspension mods.. and the h/c swap is done..

But I took some pics of under the hood, and I think that it just looks nasty..

I bought a setof Corvette FRC's. I've found the site that gives the directions on smoothing them out and everything. But I don't know what color paint and decals I should use..

I've included a pic of the car one of the engine bay. Give me your opinions on what color I should paint them and what decals to use. Also the filter setup in the engine bay pic has been replace by a catch can off to the side..


http://groups.msn.com/MikesFirebird/...msnw?Page=Last

I'm open to opinions from you guys because most of you have some extremely nice cars..

Thanks

2002 Trans Am

Nice color car, I would stick to the same with the FRCs, I think its duplicolor that makes a spray can that matches body colors pretty good.

Little plain maybe, but I am a conservative person....Polish up some of the engine bay, buy a few pretty things from MBA and your engine bay will look great

pjtimmer

I wonder what the site is you found, on smoothing them...
thanks
Peter

Z28Venom

iTrader: (13)

http://www.evlls1.com/fuelrailcovers.html

DanoHB

Yup, I used that site to customize mine as well. Worked awesome. Also decals from http://www.firebatscave.com/.

Kens_02SS

iTrader: (11)

DUDE!!......first of all you need to claen that engine bay REAL good, then get rid of those filters along the fuel lines, THEN get some FRC in your cars color

Danny2tek

iTrader: (1)

I did mine the other day heres the thread........https://ls1tech.com/forums/appearance-detailing/170097-just-did-my-frc-s.html

Z28Venom

iTrader: (13)

I know that the engine bay needs to be cleaned.. and the little filters were just a temp fix until I got my AMW catch can..