2FAST4U

A little more poweder coated parts I love the finnish!

http://community.webshots.com/photo/...52445306uyJira
http://community.webshots.com/photo/...52445819tqUPPp
http://community.webshots.com/photo/...53060061nHcmez
http://community.webshots.com/photo/...53060367lrzUTE


Oh I had the rear end POR15 black and hated the finnish so had it blasted and coated! Much more on the web page, updated weekly!

Koolaidman

Looks very nice. How much did that stuff cost?

Xsta Z 28

iTrader: (2)

Very nice!

MYBLKSS

iTrader: (1)

where is the web site

SilverGhost

iTrader: (53)

cant' say i've ever seen anyone have their bellhousing powdercoated before, nice touch

2FAST4U

well the rear end was $300 and the valve covers timing cover oil pan bellhousing was $300. All the BMR stuff was recoated but i don;t knoe the cost the jet coating on the exhaust and intake was $400 but will all be redone in black all the way to the tips!

When you go to the pic you will see a link right above the forward and back botton it says Camar SS Buildup. I am not very good with this computer stuff! Sorry

Just Floor It

I love powder coating!

HotRod68Camaro

iTrader: (29)

Do you know where i can get weld on fittings for my 68 tank. aslo, what size fittings for vent line and return line?

Thanks

Kyle

SNAKSLYR

I really liked the silver K member against the pan, looked really nice.

2FAST4U

The vent is the stock port on the stock sending unit, -6an return, and -10an feed external weldon 2015 pump. You can order the weld fittings from jeg's or summitt!

HotRod68Camaro

iTrader: (29)

Edit: I found them thanks.

Kyle

Black Iced 02

Everything is looking good!