stone150

iTrader: (2)

i went to replace my 96 cluster with a 97 i bought, and i had removed all the bolts and every thing but it would not come out, is it held in by the wires going to it? do i just yank it out or what do i do? thanks

DopeFedZ

iTrader: (34)

If you have removed all the bolts then it should just be the wiring harness plugged into the back of the cluster. Just pull that out and it should come right out.

stone150

iTrader: (2)

how do i pull the wiring harness out, i can't get to it, and someone told me it was connected to the dash. thanks

98'MidnightBlueBird'

alright if you have removed all 4 of the botts, the just pull! dont be afraid, the harnedd pops in and out by a plastice piece.... no worries, it not like a huge wire that you have to clip and un-clip, all you have to do it pull....