marlboro racer

iTrader: (2)

Anyone have a link for a how to? I need to disable them.

Thanks

keliente

iTrader: (22)

How do you want to do it?

I did mine so it disabled the automatic headlights as well.

Flawless02SS

iTrader: (9)

I'll have to find that link, but to gain access to the DRL module:

remove console trim
remove 2 7mm nuts holding radio in place
DRL module is a bit to the right, to remove it gently pull up and disengage it from its plastic mount.

marlboro racer

iTrader: (2)

i want to do it just like you did.

JasonWW

iTrader: (2)

I modded mine with 2 small toggles. One to control DRL and one for auto headlights. As far as I know, if you turrn off the DRL, it takes the auto headlights with it.

If you want pics of how to do it, let me know.

marlboro racer

iTrader: (2)

i just need to know what and where to un-plug, if that is possible......? pics would be apreciated as well.

thanks

JasonWW

iTrader: (2)

Here you go:
http://www.xse.com/leres/ss/drl.html
If you want control of it, instead of doing it like he described here "To disable the DRL module, solder a small wire between the A and B conductors of connector C2 on the back of the DRL module PC board." just extend some wires from these 2 points and attach a toggle switch. If you have auto lights, you can add a toggle switch to short the wires going to the light sensor. Doing so disables them. I mounted both of my switches in the ashtray area.

Here's more links:
http://transam.bambeezer.com/drl.htm
http://www.ls1.com/forums/showthread...hreadid=108982

ChaoSS

iTrader: (6)

i just did this about a week ago and i couldnt be happier. now i can at least show off the halos for a while until its time to turn on the headlights. plus the DRLs make the front look stupid.

marlboro racer

iTrader: (2)

i just pulled the box out last night. thanks for the info!

JasonWW

iTrader: (2)

Marlboro racer, do you have a TA or Camaro?

marlboro racer

iTrader: (2)

98 camaro

JasonWW

iTrader: (2)

OK, knowing that, you are going to lose the autoheadlight function if you wire up the DRL to a switch. You don't mind that, do you?

There is a way to keep the autoheadlights while losing the DRL's, but it requires a few relays and cutting into the wiring harness. A lot of work, too much if you ask me.

ritz

iTrader: (1)

I think my TA looks so much better with DRL's.