Clear Coat Help!!!
03-27-2005, 03:16 PM
#4
Fiery Features Director
iTrader: (11)
Join Date: Jan 2002
Location: Houston, Tx
Posts: 3,830
Likes: 0
Received 0 Likes
on
0 Posts
If you want to tackle this yourself, it should be fairly easy. Just clean the area well. Lightly sand down the edge of the clear coat and apply a thin layer until it is even. Then you can wait until that is completely dry and wet sand it with about 800 grit paper. Once that is done you go over it with polish compound and it will look good as new.
If you aren't comfortable doing it yourself, I would suggest taking it to a body shop.
If you aren't comfortable doing it yourself, I would suggest taking it to a body shop.
03-27-2005, 05:49 PM
#5
TECH Regular
iTrader: (1)
Join Date: Feb 2005
Location: Broken Arrow, OK
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
the only way to really do it right is to spray the whole panel rather than just spot touch the clear. you can try to take short cuts but it will show up down the road.