T-rex

iTrader: (3)

Where can I get a set of race pedals for my SS ?

super_fro_daddy

iTrader: (29)

custom = I'm sure a sponsor has some

cheap = EBAY, you can find 'em for less than $10 and since they are buried under the dash out of sight thats what I would get. Hell even Wal Mart has them!!!

T-rex

iTrader: (3)

Any sponsor suggestions on a custom set ?

nhra-trans-am

iTrader: (103)

dyno pro auto

227Hawk

iTrader: (1)

Another vote for Dyno pro
Hawk

BitViper

iTrader: (63)

From PFYC as site sponsor.~80 bucks

99zee

iTrader: (4)

I bought mine from Thunder Racing (old MBA stock) Haven't installed them yet.

nokeman

iTrader: (30)

those look real nice bitviper. Ima have to get me some.

BitViper

iTrader: (63)

Yeah..they attach directly to the pedal...not over it

JohnS

Here's mine on my A4 SS.


I'm not a fan of the billet alum. pedals. These are 'ricer' aftermarket pedals that are a little less than 1/8" thick. I bought them from a vendor at the local mall two years ago for about $40 Can. They came with the famous ricer red "R" on them. I removed the "R" and polished them up. They clipped on perfectly over the stock pedals. They were available for both auto & manual.

227Hawk

iTrader: (1)

The old adage of you get what you pay for. Good quality will cost more, but will
look alot better.
Hawk

rontlee

We bought a set of pedal covers for my dad's 69 camaro at xmas from Modo Innovations. They are well built and don't look ricer at all. We picked them up at their shop and he was working on the prototype for the LS1 camaros and the chevy trucks. The prototypes look cool. I don't know if he has them finished yet or not.www.modoinnovations.com
Ronnie

JonB

iTrader: (3)

Does anyone have a problem with the gas pedal hitting the carpet not allowing it to go all the way down? I have a set of cheap ones on my 88 monte SS and the gas pedal whould hit so i took them off.

rontlee

With the pedal covers the we bought for our dad's 69, they are the same shape as the factory one's and there is no issue with the pedal not going all the way down. He had a set of factory pedals out of a LS1 camaro that he was making the prototypes for and the gas pedal appeared to be the same shape as the factory one, I think, it has been a while.

Ronnie

83TA02

Do the pedals from thunderracing clip on over the original pedal? just wondering because i really dont want to drill any holes inside the car