transambandit

iTrader: (6)

okay so the ws6 hood on my ls1 front end conversion does quite fit right, its about 1/4 inch away from the headlights, whats the best way to adjust it to fit?

Thunder175

Got pics of the gaps?

95formulalt1

iTrader: (13)

need picss!!!!!!!!

wannafbody

iTrader: (2)

it might be easier to adjust the headlight covers

transambandit

iTrader: (6)

i havent adjusted the headlights and from what i can see it will only help a little bit but the back end is off a little bit too, its more towards the drivers side, so i think im going to have to drill new holes.

here are pics

95formulalt1

iTrader: (13)

looks like the front bumper needs to be pulled up a lil..it was a bitch to abjust everything man good luck

95formulalt1

iTrader: (13)

btw looks good so far any more pics???

transambandit

iTrader: (6)

how do i pull up the front bumper? its aligned with the holes that attach it to the body, here are more pics, updated pics are at the bottom of the thread
https://ls1tech.com/forums/appearance-detailing/568424-my-ws6-progress-so-far.html

transambandit

iTrader: (6)

well ive done some adjustments to the headlights and fenders but there is still about a 1/2 in gap between the hood and bumper.

Sh4Dy

iTrader: (9)

The hood/hood brackets are what need adjusted.The top edge of the hood (by the windshield) should line up with the top edge of the fender in the last pic.

vfntech

iTrader: (21)

elongate the hinge holes using a dremel or porting tool its soft aluminum so its pretty easy, the entire hood needs to come forward, good luck

transambandit

iTrader: (6)

**** man this sucks, ive tried adjusting the fenders and bumper but it still has the gap! this thing sucks to align! I adjusted the holes a little with my dremel but it didnt do a lot.