vht question
#1
TECH Resident
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Location: strong island, NY
Posts: 750
Likes: 0
Received 0 Likes
on
0 Posts
vht question
does it get applied, lets say on tailamps, on the outside of the lens? lol.. or the inside... perfectly dumbass question, buti was just wondering why they always look so glossy when its applied...
#6
11 Second Club
iTrader: (7)
Join Date: Sep 2005
Location: Eagle Pass, TX
Posts: 1,930
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2k2 camaro
I tried to clear mine with a can and they still arnt glossy so when I get my car painted in January im having them put a clear over them to match the paint! yay!
Trending Topics
#9
TECH Addict
iTrader: (27)
Sand the lights with 800 grit to unsmooth the surface for good adhesion. Wipe with alcohol. Spray with light coats of VHT until you hit the desired depth. Let dry for 24hrs. Sand with 1000, 1500 and 2000. Wipe down with alcohol. Spray as many clearcoats as you would like but use very light coats, let dry between coats, and clean with alcohol before each new coat. Let dry for 24 hours. Wetsand with 1500 and 2000 grit sandpaper and you should be set!
#10
11 Second Club
iTrader: (7)
Join Date: Sep 2005
Location: Eagle Pass, TX
Posts: 1,930
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SVT THIS
Sand the lights with 800 grit to unsmooth the surface for good adhesion. Wipe with alcohol. Spray with light coats of VHT until you hit the desired depth. Let dry for 24hrs. Sand with 1000, 1500 and 2000. Wipe down with alcohol. Spray as many clearcoats as you would like but use very light coats, let dry between coats, and clean with alcohol before each new coat. Let dry for 24 hours. Wetsand with 1500 and 2000 grit sandpaper and you should be set!