Blade

iTrader: (1)

My right side turn signal/parking light housing is a POS. I replaced the gasket and moisture is still getting in there. I have to replace bulbs once every few weeks it seems.

I know many clear corners tend to also let moisture in and the dealer wants too much for a stock parking lamp.

Anyone know of any clear corners that don't let moisture in?

Mistacamawo

Have you tried drilling holes in the bottoms of the housing? That seems to be pretty effective. Or you can move to CA where it rains 2-3 times a year

chon79

iTrader: (24)

Drill holes and use some clear rtv where the housing meets the lens. Also smear a layer around where the bulb sockets go in. Let it dry for 30 minutes and slap em back on. Works like a charm

RUDE SS

iTrader: (4)

The Holes work!

Brian2006

iTrader: (42)

drill some holes and silicone that bitch up!

BlackBADaSS02

iTrader: (17)

I just used some clear silicone, and I've never had a problem.

LS1 Terror

^^^ what he said

VENOMIZED03

iTrader: (21)

^^^ What he said too. Thats what I did. I have had them on there for 3 months and not a hint of moisture ever got in there

Stang-Slayer

iTrader: (16)

I bought some on ebay for 7 bucks for a set.....they havnt fucked up yet