67SS&99SS

iTrader: (7)

I've had these for a while in my car and just now got around to taking a picture of them. I cleaned the car up last weekend for a car show so my interior was presentable for a photo. I put a red SS outlined in white on my gauges as well as a red bowtie. I also purchased the simulated stainless camaro inserts for the steering wheel. My old steering wheel cover was getting pretty ragged and my dad found this one a day before the car show. I think it compliments the interior nicely.

CASHss99

iTrader: (2)

sweet where you get them

CASHss99

iTrader: (2)

and how did you change that shifter

67SS&99SS

iTrader: (7)

I got the shifter from Thunder Racing after they bought out MBA's remaining stock when they went out of business. The **** comes with an adapter and some thin shims to get the lettering to line up just right. A large staple holds the stock **** in place. Remove it, put the adapter on your shifter, and spin the **** on. I got the decals from a source that doesn't sponsor the site. I'll pm you the address.

CASHss99

iTrader: (2)

thanks alot

CASHss99

iTrader: (2)

whats with tail for the shifter?

FadedSS

iTrader: (15)

also interested in the decal site. very interested in doing that shifter mod. any tips/suggestions/recommendations would be appreciated.
Thanks bro

67SS&99SS

iTrader: (7)

That is the way the shift **** is made. In order to shift out of park into reverse or drive, you push down on the entire **** and pull it into gear.

67SS&99SS

iTrader: (7)

Take your time during the installation. The decals are very delicate and can be torn easily when removing them from the paper. Make sure that your hands are clean before handling them Any oil from the skin in your hands will keep them from adhering the gauge face properly. The shifter is pretty straight forward. Just remove your old **** by pulling out the large retainer staple on the front part of it, install the small adapter on your shifter that is included with the MBA ****. Use the small shims that come with the **** until you get the lettering in the position you like. Here is a birds eye view of the shift ****.

FadedSS

iTrader: (15)

thanks for the help man i will be ordering mine very soon!

67SS&99SS

iTrader: (7)

Your welcome.

94blownz281

iTrader: (12)

shifter idea is pretty cool.... nice for us A4's.

94blownz281

iTrader: (12)

what size tail do i need for my 94 LT1 auto? also could i just stick a decal on the shifter instead of paying for the engraving?

67SS&99SS

iTrader: (7)

The shift **** is universal for F-Body shifters. One size fits all. I would buy the engraved one. After a few days the decal will look dirty from the oil in your hands and it will peel off easily.

94blownz281

iTrader: (12)

Okay cool thanks!

1998Z28LOADED

also interested in decal company.... thx in advance

95TAGary

iTrader: (4)

I have a small firebird on my guages and the same shift **** with the
trans am bird on it. Love them as well.

Ls1CamaroGuy87

iTrader: (7)

wow, those look great! nice choice in color! very clean looking interior by the way. Now all you have to do, is do what I did and install a Trans Am gauge bezel to really make it look better

Adam_346

looks pretty good.

CASHss99

iTrader: (2)

so i want the tail then.. do they still sell the black with the ss on it