cryptnosis

iTrader: (7)

Here is the problem, i cut the A/C on to any setting and it only blows to the floor and windsheild vent, on all settings, i just reinstalled it, i think i am missing a piece on the control **** back, but just need some advice.

BAD ASS TA WS6

iTrader: (5)

Broken vacuum line? Make sure they are all connected... Sounds like a definite vacuum line issue to me.

Psychopjv

iTrader: (16)

def a vac line issue thats what it defaults to so you can see out of your window.

cryptnosis

iTrader: (7)

where is the vacuum line located?

cryptnosis

iTrader: (7)

ok, tested and no vacuum leak, anything else, someone was trying to tell me something about some wires on the passenger side hood area, anyone know anything about that

Tonys99RamAir

iTrader: (10)

There is a little check valve type thing on the passenger side that controls which one of your vents open and close and if it goes bad it will cause it to only blow out there and it is not gonna show a vac. leak. Here is a pic of what I am talking about (sorry for the ghetto ms paint job, lol): http://i17.photobucket.com/albums/b8...wiremod_05.jpg Good luck getting it fixed.

cryptnosis

iTrader: (7)

very affective though , thanks for the advice. Most helpful so far.