qwikz28

iTrader: (12)

If you want it, he will build it.

http://ls1gto.com/forums/showthread.php?t=207881

I PMed Mr. Kircher last night and he says if we want it, he will build it. but what is it? its a front end splitter. our cars have a very high nose and a front end splitter would be great to give us lowered guys the aggressive front end we are looking for. Its available for the GTO, but there is a larger crowd of fbodies out there. the gto one is about $140 shipped fyi. here are some pictures:




With support rods



lets see some interest guys, i know i'm not the only one who wants this.

2002_z28_m6

iTrader: (10)

I would need to see one on a camaro but It might look cool.

davidv

that looks good on the gto man, looks better without the supporting rods imo

splitplug

iTrader: (1)

Yea, looks much better with those rods. Interested only because I like the way the DH Camaros have that blended lip on the bumper.

thmass6

iTrader: (2)

At first I was thinking no, but that actually doesn't look bad. Can someone maybe photoshop this?

italicizedsponge

iTrader: (3)

thats tight without the rods

chromeplated500

iTrader: (10)

not a fan of the rods, but Im gonna subscribe hoping somebody will do some photoshopp

phantomzer0

iTrader: (17)

I personally have always wanted one of these for my LT1. I would want it to sit out a little further than the GTO's. I'm in if he makes them, especially if he makes them for us LT1 guys!!

fast01z28

iTrader: (6)

id be in, and if you were in cali id give you my car for R&D to build it.

not sure on the rods. without the rods it is not very noticeable. also, not sure how this will effect ground clearance. i dont see it hurting making it any worse.

whatsgrip?

I chose camaro but I'd rather see it on my Vette

mindreaper

iTrader: (1)

I could be interested. I would have to see it on a Camaro first.

qwikz28

iTrader: (12)

the rods aren't included by the way, but if you want it, he will tell you where to get it

02gtp4now

iTrader: (7)

looks good on the goat without the rods but need a ps to know about a f body

Ericbigmac83

iTrader: (19)

somebody chop one on a camaro

ChaseSS

iTrader: (17)

I would be interested in one on my camaro, but I really would like to see one done beforehand..... need someone to photoshopp it

Shockwave179

iTrader: (7)

I think an fbody might look sort of stupid with a traditional thin splitter like that. Maybe if it was a bit thicker it might potentially look better.

Ar0ck

I would most certainly be interested in purchasing one asap.

Ar0ck

I photo-shopped my car lower, but I do have coil-overs up front so I can go lower if I wanted.

2002_Z28_Six_Speed

iTrader: (19)

How is it held on? with the factory bolts?

phantomzer0

iTrader: (17)

I know on the Mach1 Mustangs their front lip's are held on with push pins. You have to drill out about 10 holes, then insert the pins. These pins are the kind with a little pushy part in the middle and when you push them into the surrounding plastic they will expand and form a tight hold. It is probably the same deal for these.