Archdog7564

I remember seeing a write up on how to paint the 5.7 and the raised lines across the FRC. It was a write up on a web site that somebody made. I thought i booked marked it, but i didn't. I need that URL so i can finish my FRC. I will post pics of my FRC.

Stage one done. All cutting done. I thought it was going to be a pain in the a**, but it only took me about 3 hrs. And using a dremel was soo easy. I made templates out of a really thick shipping paper, and thats what i made first, and then traced onto the FRC and it was easy.

Thanks

justin
http://archdog75.tripod.com

MadIceV8

iTrader: (12)

I found the cutting to be the easiest part. Its the filling in the corvette and sanding everything down to be smooth the hardest parts.

blackls1maro

iTrader: (2)

there's a write up on www.ls1howto.com

Archdog7564

I'm sorry, but i don't see a write up on ls1howto.com,,, if you can give me a direct url address.

but thanks

justin

talonis

http://www.ls1howto.com/index.php?article=7

Archdog7564

Thanks for the URL.