Turbo 400 tranny lines
10-13-2009, 04:01 AM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Location: Oklahoma city
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Turbo 400 tranny lines I have steel braided line to run to my tranny cooler, does anyone know what fittings i need to screw into the case. I took out the brass fittings for the hard line and had some 1/4 pipe to -6 fittings lying around and they start but dont thread in very far before the feel like they are getting tight. I didnt know if the case had a different thread than 1/4 pipe. thanks
10-13-2009, 06:21 AM
#2
this has been posted a bunch, but here goes-the threads are 1/4-18 STRAIGHT thread, not tapered-ATI Perf Products has them in 6 or 8 AN
some guys jam in the tapered ones, but why bugger the case when the propper stuff is out there
www.atiracing.com
ATI #925137 for the #6
" #925138 for the #8
these fittings go in where the brass ones came out
some guys jam in the tapered ones, but why bugger the case when the propper stuff is out there
www.atiracing.com
ATI #925137 for the #6
" #925138 for the #8
these fittings go in where the brass ones came out
10-13-2009, 06:24 AM
#3
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Location: Oklahoma city
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
great thank you i tried a search but no luck. And I agree I did not want to booger the threads up thats why I quit when it started to feel funny. thanks again.
