12leavu

iTrader: (3)

im running a 4l60 in my fd rx7 and a b&m shifter. the trans does not have a mlp switch nor does the shifter. my problem and question is i cant get it to shift wot from 2nd to 3rd. it drives fine at normal throttle, but it never shows 3rd on a scanner. even if it is in 3rd. it just goes 1,2,4 on the scanner as it shifts thru. it holds 3rd gear fine if you manually hold it in third, but if you leave in d. it will not shift into 3rd a w.o.t could this have anything to do with not having a mlp switch. ive already tried lowering the mph in my tune by 10 mph.

MUSTANGBRKR02

iTrader: (91)

Try zeroing the MPH field out and see if it shifts then. This will eliminate it being mechanical. Have you raised the rev limiter?

12leavu

iTrader: (3)

its at 6800, id hate to raise it much more. havnt tried zeroing out yet

MUSTANGBRKR02

iTrader: (91)

Try zeroing that out and post back up.

12leavu

iTrader: (3)

do you mean part throttle and wot ?

MUSTANGBRKR02

iTrader: (91)

try one then if that doesn't then try both.